Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

iMovie 10.1.6 on El Capitan - sharing/rendering returns CompressorKit. ErrorDomain error -1 - Caused by MobileDevice.Framework provided only in X86_64 and not anymore in i386 architecture.

Hello Community, I know there are numerous posts on iMovie 10.1.XX where you can't suddenly render/share your project and end up with an error "CompressorKit. ErrorDomain error -1". I have read and tried multiple solutions found on Internet, mostly about de-installing/reinstalling iMovie, and rebooting in safe mode, then rebooting again, that did not worked for me.


I actually went to the bottom of this problem and found this was due to an iTunes update on my machine, that updated the Library MobileDevice.framework, into a newer version that is only 64bits compatible, and not anymore multi-architecture i386 and X86_64.


I wonder if Apple will continue providing moving forward this update only for the 64 bits architecture and break the old OS ?


On my machine here is how I located the trouble maker, start the utilities/console, start iMovie and attempt to render your project. After the error message, check the console, there is the offending message about the MobileDevice.framework that does not match the architecture. To solve it, get your TimeCapsule backup, locate a previous version of the library. It should be located into


/System/Library/PrivateFrameworks/MobileDevice.framework/


Which is a system protected area. So restore somewhere else, reboot in Cmd+R safe mode, and manually force replace the offending library with the previous version, restart and voilà, iMovie is happy about that compressor Library again and will proceed with the share/rendering.





36 replies

YES!! This was exactly the solution I needed! THANK YOU!


The CompressorKit. ErrorDomain issue seemed to come out of nowhere for me in iMovie. Last Thursday, everything was fine. Sunday night, no more exports/file saves. I searched everywhere and went through all the offered solutions: trying a fresh project, creating a new library, restarting into Safe Mode then back, creating a temporary account, deleting iMovie and reinstalling and finally just giving in and upgrading from El Capitan to Mojave (which I'd avoided because of audio drivers). Hours and hours of wasted time, nothing fixed the error.


I'm so glad I found your post this evening. I knew immediately that it was the right solution, because I'd had to reinstall iTunes last Friday, the day after my last successful iMovie project. I can't believe I didn't make the connection.


After seeing your post, I found that MobileDevice.framework was indeed the only recently updated folder in PrivateFrameworks. Fortunately, TimeMachine had the original 2019 folder in my March backup. Took me awhile to figure out how to use Terminal in Recovery Mode to allow me to get past the PrivateFrameworks permissions (I never dig this deep into OSX), but you provided just enough information for me to find that csrutil would give me temporary access. Copied the older MobileDevice.framework folder over the new one, rebooted, went back into iMovie and was finally able to render my movie.


Again, thank you so much for digging into this. After two days of searching, I'm certain you are the only one who has identified this issue. It may not be the solution for all, but I bet it is the solution for anyone who has recently updated/reinstalled iTunes.

Hi Paulthom2,

Thank you very much for your help. I allready fixed this issue. To modify mobile device.framework, you need to start your mac with CMD+R to start with recovery tool. When the recovery tools appears you go on the top of the screen to open terminal tool and write the command : csrutil disable After that, restart your mac normally. Now you should have access to the folder private framework and you should replace the defect folder : mobile device.framework by an old one.

You need to restart your mac ... and it should works after

Hi @johnnyrog

Are you in the UK? I'm sure I can help you out with some simple step by step instruction.


To solve it you need to get your backup and find a previous version of the library. Find it in


/System/Library/PrivateFrameworks/MobileDevice.framework/


If you don't have that, let me know and I'll get you to a place you can download it ( my archive).


Drag it into some place you can retrieve it at a later step - lets say Documents folder.

Reboot into safe mode by holding Cmd+R

Go to the top menu and select the Terminal application.

Type the bold text here - csrutil disable - and then restart (normal restart).

Go to /System/Library/PrivateFrameworks/MobileDevice.framework/ and delete 'MobileDevice.framework' which is a library.

Replace it with your earlier saved 'MobileDevice.framework' from the Documents folder, making sure you put it into the same folder as the deleted one (/System/Library/PrivateFrameworks/ ).

Restart


Sorted. Let us know if it worked please.

Quick follow-up with some possibly useful information. I now remember why I had to reinstall iTunes in the first place. When I connected the iPhoneXR (iOS 13.3) to the Mac to transfer an MP3 file to Music, I found that the iPhone no longer showed up as a device in iTunes (no icon). I swapped cables, jumped through hoops, nothing. So I deleted and reinstalled iTunes (12.9.95).


Now when I connected the iPhone, I got a pop-up saying "A software update is required to connect to iPhoneXR" (see https://support.apple.com/en-us/HT208831). So I installed, and it fixed that problem.


I am convinced that this update is what replaced MobileDevice.framework (same date and time), and broke iMovie resulting in the "CompressorKit. ErrorDomain error -1" error.


Now that I have gone back to the original MobileDevice.framework and iMovie works again, I can no longer connect my iPhone to iTunes! The "A software update is required to connect to iPhoneXR" popup has returned. But I can live with that. I rarely sync between the Mac and iPhone by USB. It's much more important for me to be able to use iMovie. I'll send a note to Support for them to look into it, but I can't put anymore time into trying to solve both issues.

I spent nearly a half-hour on the phone with support advisors this morning. The long and short of it is that the only recommendation they're willing to give is to update to Catalina. That seems to be the only solution to this particular set of circumstances that result in "CompressorKit. ErrorDomain". If you want a working iMovie and the ability to sync to your phone, you have to update to Catalina. I guess at that point, a new version of iMovie (10.1.14) becomes available to you, and I'm guessing it's 64-bit compatible. iMovie 10.1.8 is the only version available for Mojave or El Capitan, and it's not compatible with this 64-bit MobileDevice.framework.


I did not get the impression that they were interested in the details of this solution (I pointed them directly to this page), and didn't get the impression that any sort of fix would be coming. But the information has been passed on to the dev team. We'll just have to wait and see.


Otherwise, according to Support, you'll have to follow the steps that have fixed it for some: trying a fresh project, creating a new library, restarting into Safe Mode then back, creating a temporary user account and trying it there, deleting iMovie and reinstalling it. If none of that works, Support says upgrade to Catalina. I can only say that I went through all those other steps (including updating to Mojave), and that didn't fix it. Unless I'm willing to update to Catalina, I won't be able to have both iMovie and iPhone sync (and I can't update to Catalina without the risk of breaking a whole bunch of 32-bit apps and drivers).


I had this problem too and nicocaro's suggestion worked for me. I got a new iPhone in April and had to update my software (iTunes). I think this is when the MobileDevice.framework file was replaced. It took a few restarts (I had to disable system integrity to replace the old file from a Time Machine backup).

However, now when I plug in my iPhone, it won't load in iTunes unless I update it again, just as rsaintjohn mentioned. This will likely replace the MobileDevice.framework file I just restored.

I believe that iMovie 10.1.14 will run on Mojave. iMovie 10.1.6 is the highest version of iMovie that will run on El Capitan.


Apple has moved to 64bit and in the transition process there likely will be conflicts with older versions of iMovie as we apparently are seeing. Everything is not quite homogenous yet.


The incompatibility between 64bit and 32bit apps on Apple devices is an issue that cannot be resolved, unfortunately, until the third party developers of these apps release 64bit versions. Some older apps are no longer in production, so not possible to get 64bit versions. In that case one can make a boot disk that runs Mojave or earlier for the express purpose of running these older 32bit versions. Meanwhile, be aware that updates potentially could cause conflicts until all of this is worked out.


— Rich



Hi Clotilde,


I am uploading the "good" mobile device file. I use Final cut but the problem was also on imovie, so I think it is not necessary for you to desintall imovie

Just replace on the folder private framework the complete file mobile device.framework. I am sure that it will work after.


[Link Edited by Moderator]

Hi Clotilde_C,


The video is uploaded on youtube. You will find it on youtube search : erreur partage vidéo FCPX/Imovies ---- video export final cut crash

On the description of the video you will find a link to download the correct mobiledevice file


Hope it will help you.

Hi Donatien290

I uninstalled and re-installed iMovie from the App Store - which fixed the problem for me - I guess the install put back the older library version. Running High Sierra 10.13.6 I got iMovie 10.1.12 installed.

So looks you should be able to fix this even without a TM backup.

Paul

You my friend are a genius!

I spent all day yesterday on trying to figure out what the issue was. I have an old Macbook 2010 running El Capitan and iMovie as well as Final Cut were not playing ball. I tried everything everyone had already suggested, nothing.

Then this morning I got on my scheduled call with Apple Support. Very helpful guy on the phone but basically didn't really know the issue.

Then when that call finished I saw there'd been a reply from my question last night on here from Rich839 https://discussions.apple.com/thread/251311132?answerId=252529521022#252529521022. He pointed me to your post.


I tried it and it worked for both iMove and Final Cut. I remember I updated iTunes a couple of weeks ago so I could get some new photos off my phone, which it wasn't doing.

I'd rather have video editing functioning than the phone sync option.


Thank you so much!

I share the very same frustrations. However, I need a bit more info.

I too ran the Console and then ran iMovie and attempted an export. Console logged a number of errors involving MobileDevice.framework.

The suggestion here is to manually force replaced the offending library with a previous version.


I need some instructions. How do I that?. (I do run Time Machine with automatic backups. It'll be a crap shoot to figure out how far back in time to go to find a previous version of the MobileDevice.framework.)


Second concern: The "solution" means the iPhoneXR no longer connects to his iTunes, apparently an acceptable tradeoff.


I am not comfortable with that. I only sync my iPhone11Pro with my iMac by a cable. I do not use wireless synching or backups.


Thoughts?

That's a ****** shame. I cannot upgrade to Catalina or it turns a couple of valuable applications into bricks.


It's interesting that you say iMovie 10.1.8 is the only version available for El Capitan.

I run El Capitan and my iMovie is at 10.1.6, not 10.1.8. That would imply that an update is available, but I find no such later version available when I check for updates on my software. But, it also sounds like even that version has this fatal error.


If we cannot export anything from iMovie, I guess it has become a brick too.




Thanks nicocaro that's very helpful. I suspect that's what happened in my case, as I rarely use iTunes but had recently run some updates. I don't have a TM backup so that restore is not an option for me. I guess Apple is committed to pushing everything towards 64 bits apps, so we're all headed to Catlina; fortunately everything I use regularly is 64 bit so not too much of an issue, but I know for others some 32 bit apps are vital. Not for the first time Apple have broken something :-(

Rich839 wrote: "I believe that iMovie 10.1.14 will run on Mojave." For me (MacBook Air, now on Mojave), iMovie 10.1.8 was the highest update available. I can see in App Store that the latest version is 10.1.14 and it even says "Update". But when I hit update, I could only see an endlessly rotating download icon. I'll give it another shot, thanks for the heads-up! Though, at this point, I probably should leave well enough alone, lol

Vince Patton --


I think that during this period of upgrades there are going to be glitches and conflicts as everything gets integrated, even with older but currently usable versions of Apple products. I suspect that many of these issues will be resolved over time. Meanwhile possibly some of those issues can be solved by using boot disks with older operating systems for running legacy software and earlier versions. Here's an interesting Apple bulletin that describes how to make a boot disk. Never tried it myself, but looks doable.


https://support.apple.com/en-gb/HT201372


-- Rich


Hi! thank you so much for doing far better job than apple support! (they only advised to reboot in safe mode, or reset the OS)

But I have an additional problem: I don't have any Time machine back up!!! :-((

I reinstalled an old version of iTunes (12.6.2) but the problem is still there.

Do you have any idea how to solve that? it is very frustrating knowing the solution and not being able to making it happen.

Thanks a lot!


ps: I don't need to sync with iPhone

Hello community,

I have the same error on imovie and also Final Cut .... I think you found the solution, but in my case I have no time machine before the update of device mobile.framework.

I have no permission to modify this file or replace by another one, do you have any solution to replace it without timemachine save ?

Thanks for help

Hi Donatien, thanks a lot for sharing your solution.

Before doing something wrong I'd like to get your advise.

Do you think it will work if I modify mobile device.framework in safe mode just like you said with the command csrutil disable. Then restart normally. Then desinstall and reinstall iMovie.

I don't have any Time machine back up, so I don't have any old version of mobile device.framework.

What do you think?

many thanks

I’m in desperate for help with this same error. Please forgive me for not understanding how to complete this fix with terminal. If there is any layman ways of explaining it I would so very appreciative. Thank you.

@namaquaman, @donatien290

Could You send me an earlier working version of file MobileDevice.framework? Unfortunately I do not have any system restore point available in Time Machine :( Please send me your archive file to: [email protected].


Thank You very much in advance!


You guys are simply gods to me today. You not only figured out the absolute only solution to this issue for me, but also solved another error screen that popped up for LOGIC 9 pro. I went back in memory on kg time machine & realized what the culprit was. After repairing the problem as for your solution, I realized it’s due to an iTunes update. Because after a few bites the machine told

me there was an update for iTunes. I dare not install that now. I think by replacing the file back to your suggestion I must somehow return something g I iTunes backwa 00004000 rds. It all working now so I won’t update iTunes now. I can not thank you enough 🙏🙏🙏

Hello,

Any chance of reposting the mobiledevice.framework file? It seems to have been deleted from the Youtube post.

Or does anyone else have a link to this file that will hopefully fix my iMovie?

Many Thanks!

Thanks, I'm glad this helped. I'm hosting a personal blog and posted also there,,,, and since then received a lot of comments and visits for that post. Looks like I hit something ☺️

Of course, in this case the developer in question is not a third party. It's Apple itself which makes iMovie.

I will upload a video on youtube at the end of the day to show step step how to do ...

Hi Donatien, thank you for your help. You rock!

Looking forward to watching your tuto, looking forward to getting out this mess.


Great !

Thanks to Nicocaro ... he found the issue ! Just I wrote a procedure




Thank you soooo much @donation290 (and @nicocaro)! just found your video on youtube. I'll tell you if it also worked on my mac book air 2011 running sierra 10.12.6 (I'll post a comment on youtube).

Hi, look my youtube video, there is a link where you can upload the file, on the description.

Hi, but where is this video on YouTube? What's the name of your YT account?

Hello, it is already uploaded on the description of youtube video

Got it and it WORKED. Thank you so much!

When I look in the app store for available updates, iMovie 10.1.14 is shown as an available update, as you have found in your case. I am running Mojave, as I mentioned previously. I don't need at this time to update to 10.1.14 since everything is working fine, so I haven't tried to see if the update function would work. (I'm leaving well enough alone. :)) Perhaps you need to move your iMovie app from the applications folder to the trash, but don't empty the trash. And then see if the app store will update. If it still won't do so, you can drag your iMovie app out of the trash and replace it in your applications folder.


But maybe you are right about not wanting to do too much fiddling. :)


-- Rich



Glad this helped. As said in the original post, I found this was embarrassing to not have a solution for this. I recognize that the final outcome you may have is that either you choose to have the capacity to produce/share your iMovie creation to the end, or have the capacity to sync your phone with your Macbook. For me that was a quick call and I prioritized the iMoive output.


I have posted instructions on my private blog in french language, and if one day the post link of @Donation290 does not work anymore, I also have on the side my MobileDeviceFramework library saved in a Zip file in case it disappear from my TimeCapsule or from the @Donation910 youtube post.


Good luck everyone, glad this helps ironing this one out.


On the note side, I wish that Apple would recognize the bug and produce the iTunes update library moving format in multi-arch format, my understanding is that the mach-o format is specifically designed for this and it maybe has no particular implication for Apple to compile the library in multi-architecture instead of only x64 bits.

hi, youtube search : erreur partage vidéo FCPX/Imovies ---- video export final cut crash