Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Ventura display corruption on 5120x1440 resolution

I use a Philips PHL 499P9 ( 5120x1440 ) connected to a Macbook pro 2018 13" I5 2,3ghz running Ventura 13.0.1 using USB-C (Apple Thunderbolt cable). Screen scrambles. It was previously working fine on both Monterey and Big Sur!


Is there any fix schedule?? Do I have to downgrade to Monterey?


//Jan

24 replies

This is not a software conflict, it's a Ventura issue. I own an Intel based Macbook Pro and it's a consistent issue. I wiped the device clean today with the same result. It's a driver issue on specific mac hardware as my newer Macbook Air works fine. The device has no issue if I use PBP and only 1/2 of the display.

I found the solution for Samsung's G9 super ultrawide monitor, just disable Game -> Adaptive-Sync in monitor settings. The 5120x1440 resolution should appear, if not, click on Show all resolutions in the settings. Hope it helps you all :)

After disabling Adaptive-Sync, I found I also had to adjust the “DisplayPort Ver.” down to 1.1 (under “System”, also within the monitor’s built-in menu) Unfortunately, that caps the resolution at 2560x1440.


Again, that’s specific to the Samsung Odyssey G9. For reference, my MacBook Pro is a 13” 2017 model running Ventura 13.3.1. Curiously, with no monitor menu changes it also worked fine from safe mode. It also works fine via HDMI.

Hi there Jan_P_Norway,


If the issue doesn't persist while your MacBook is booted in safe mode, then the culprit is most likely related to some login items. Follow these steps to further isolate the cause of the issue with your monitor:


If the issue doesn't continue in safe mode
If the issue doesn't continue while in safe mode, leave safe mode by restarting your Mac normally. Then test for the issue again. The issue might be resolved.

If the issue returns after leaving safe mode, startup items are probably at fault. Apps can install such items in numerous places, and they aren't always easy to find or recognize. For that reason, you should first make sure that you've installed any available updates for your Apple software and third-party apps.

If updating your software doesn't help, try any of these solutions:
1. Test your login items.
2. To learn whether software in your user account is causing the issue, set up a new user account, then log in to it and try to reproduce the issue in that account.
3. Unplug all accessories from your Mac, including printers, drives, USB hubs, and other nonessential devices. You could have an issue with one or more of those devices or their cables.
4. Reinstall macOS.
If you still need help, please contact Apple Support.

You'll find this information here: How to use safe mode on your Mac - Apple Support


For more detailed steps about testing your login items, have a look at this link: https://support.apple.com/guide/mac-help/remove-login-items-resolve-startup-problems-mh21210/mac


Take care.

On another post, the person disabled USB on the USB-C port using the monitor’s on-screen menu. Essentially, the USB data signal was confusing Ventura.

I don’t know if this would help in this case, and I find it odd that it would be resolved in Safe Mode.

tanks a lot, kill the WindowsServer process when the mac is connected to the external display fixed the problem...

Hi Jan_P_Norway,


We understand this didn't happen with earlier versions of macOS, but we still recommend to check out the steps below to see if those help:

"Check your cable or adapter

Disconnect the cable from your external display from your Mac, then reconnect it. If the cable from your external display doesn't connect to the ports on your Mac, you can use a USB-C or Thunderbolt adapter. If you're using a USB-C or Thunderbolt adapter to connect a display, the adapter must be compliant with DisplayPort Alt Mode or Thunderbolt / USB 4."


Those steps, and more, can be found here: If your external display isn't detected or appears blurry when connected to your Mac - Apple Support


Also, you connect your Philips PHL 499P9 directly to your MacBook Pro with the USB-C cable, correct? We want to make sure we fully understand your setup.


Also, do you notice this happening when you are doing something specific (opening an app, turning on your MacBook Pro, so on) on your MacBook Pro? Your answers can help us determine possible next steps.


Take care.

Jan_P_Norway,


Let's try creating a new administrator user account in you System Settings to see if the issue persists there as well. This will determine whether the issue persists across the entire OS or not. You can learn how to do that here:


Create a new user or group.
Click the New Account pop-up menu (you may be asked to enter your password), then choose a type of account.


Here's a link to the full resource: Change Users & Groups settings on Mac - Apple Support


If things continue you can reach out for additional support here: Get Support


Take care.


Hi Jan_P_Norway,


If you're able to reproduce the behavior in a test user, this would indicate a system-wide issue. Safe mode is useful when you're trying to resolve an issue that doesn't seem to be associated with using any particular app. How to use safe mode on your Mac has more information, along with steps to start up in safe mode.


"Intel processor

  1. Turn on or restart your Mac, then immediately press and hold the Shift key as your Mac starts up.
  2. Release the key when you see the login window, then log in to your Mac. 
  3. You might be asked to log in again. On either the first or second login window, you should see ”Safe Boot” in the upper-right corner of the window."


Let us know if you're able to reproduce the display issue in safe mode. We'll go from there.


Regards.


same issue with ventura and a philips 499P.. Works well in safe mode

can't find the blocking extension

No, it does not work on my M1 mac mini: screen is black, flickers for half a second, then goes black again. have tried third-part software like SwitchResX to no avail. Reinstall OS did not work either. Fine on previous version of MacOS, completely bust on Ventura.

Essentially, this renders my expensive Samsung Odyssey Neo completely useless with MacOS. Thank god, I have a Windows PC in my office as well. My mac mini is essentially reduced to functioning as a letter press right now.


The lack of interest or response from Apple on an issue that effectively renders the Mac completely unusable is beyond appalling. This can not even be called "bad costumer service".


This is p*ss*ng your customers in the face while laughing at them.


Problem is still existing on Intel Macs. Working fine for ARM Macs. But not fixed on Intel even with 13.2.

Hello,


I'm having the same issue with my Samsung Odyssey G9 5120x1440 display. In safe mode, the monitor works as expected. Booting in normal mode, the screen is scrambled.

Is there any fix/workaround for this issue available? Or will I have to downgrade to Monterey?


Thanks,

 ~ Manuel

Hi, I never got this resolved. Apple Support has been useless... My temporary solution has been to use HDMI cable (via adapter) with lower resolution, hopefully there will be a fix in an update. Luckily (???) I need to use a Windows PC for my work, so I can enjoy full resolution of my monitor...


Cheers,


//Jan

Hi, it works perfect in Safe Mode.... full 5K resolution using Thunderbolt / USB-C. But, after reboot, back to square one... :-(


Regards //Jan

Hi Claire,


I use a (Apple) Thunderbolt (Usb-C type) to connect my PHL 499P9 directly. I also have a Windows Laptop, still working fine with my PHL 499P9 at 5120x1440 in 60Hz. If I connect my Macbook Pro to my external monitor and choose 5120x1440 (which is nativ resolution for this 00004000 monitor) my monitor screen is scrambled / unreadable. When I tried different settings, I even ended up with having my laptop monitor being scrambled and my monitor working in low resolution...?... weird. My workaround just now is to use 3840x1080 resolution and a HDMI cable with a HDMI to USB-C converter connected to my Macbook Pro, but I have to use the USB-C port on right side to make it work (I normally use a port on the left side for my Thunderbolt-cable). If I use a port on the left side, it flickers to this scramble view a bit.


To me, it looks like there is serious driver issues with Ventura....


I would be thankful if you can help!


Cheers //Jan

Hi did this ever get solved? I have the exact same issue with the same Philips monitor and a 2017 MacBook Pro. Monterey was fine and still is on my other Macs. Boots fine in safe mode. Then is no good when normal boot - scrambled colours / flickers in both laptop and monitor. No login items in the login list. Did a full clean reinstall of Ventura 13.1. Basically makes my monitor unusable. Super frustrated!

Hi Claire - do you know whether this is being addressed by Apple? Or do you know who we could contact to find out? Seems it is a well known issue, one that is causing major angst in the community, and does not appear to have been addressed yet. Thanks!

I expect Apple to fix this major issue. I paid good money for my hardware, and expect the operating system to recognise the resolution without having to do all these hakuna matata stunts, or having to resort to 3rd party apps to fix the issue.


If my Samsung supports 5120x1440px, I expect my MacOs to support it. End of Story.

Hi, I did try this, but the issue is the same - unfortunately....

I have the same issue with Ventura display corruption on 5120x1440 resolution on Samsung Odyssey G9 monitor


I'm having the same issue with my Samsung Odyssey G9 5120x1440 display.


I was on Monterey, upgraded to Venura, and now my display is not working in the right resolution.


Please help

I also have the Samsung G9 (the first generation) and this fixed it for me (on my M1 Pro 2021 14").


I guess I'll switch it on and off when switching between my Macbook and my gaming computer.