Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

My iPhone's camera is not working correctly and it looks blurred

I have a 14Pro with iOS 6.1.1 and every 3rd party app I have for scanning barcodes (including Amazon Shopping app) is having issues with focus/zoom view.


When the barcode is in the optimal scanning distance or about 2" away (compared to iPhone 12 or my Android phone), it is blurry and cannot be decoded by the 14Pro camera.


To get the barcode in focus, the phone needs to be about 5-6" away, but at that distance some of the high density codes (QR Code and Datamatrix) cannot be decoded as they are too far.


[Re-titled by Moderator]

50 replies

Because the camera system on the iPhone 14 has a longer minimum focus distance than on past iPhones.


To take close up photos you need to have a 14 Pro/Pro Max and use Macro mode.


Take macro photos and videos with your iPhone camera - Apple Support


Many third-party apps do not support Macro mode, so you may need to use Camera to take the photo.

I never said or even hinted that I spoke for Apple, I said I've never found a bar code that didn't scan with Scandit.


When you can scan bar codes 100% of the time with a third-party app, that puts the blame squarely on whichever app can't read them and/or the technique being used to read them. As I said, if you are used to filling the box with the bar code, you cannot do that with the iPhone 14/Pro/Pro Max because newer phones have a greater minimum focus distance - you have to back off until the bar code is in focus, and then it will be read instantly, at least by Scandit; I've had the same experience with apps from Amazon, Walmart and others.


What has Asset Tiger said about the issue? Reviews on the App Store seem to indicate a fair number of people are having issues with the app itself.


If you feel there is an iPhone issue, contact Apple Support directly as they are the only ones who can get an issue looked at; we are all just fellow Apple users here giving the benefit of our experiences to help people solve issues.


Contact - Official Apple Support


They can be, but the app you are using needs to be updated to be able to do so.


Contact the maker of your third party app and ask them to update their app for newer devices and iOS 16.


At present there are multiple third party apps that can read bar codes and QR codes, including the apps for Amazon and Walmart.


A great demo is the Scandit app, which acts as a showcase for their technology.



It does work, the app I mention is not the Camera app.


I have done extensive testing, scanning bar codes, QR codes, driver license bar codes, the bar codes on the back of customer loyalty cards, and the app can read them all.


The app is of course a demo app written by a company that specializes in reading codes, but if their app can do it, so can others.


The key is to have the code in focus, and to back away from the code until it is.


You may think the code is then too small for the device to read, but it's not; for both QR and bar codes my phone can easily scan them from 11" (roughly 28 cm) away.


The problem is trying to scan from 2" (5 cm) away; the minimum focus distance is around 3.5" (approx. 8.9 cm).

There's nothing to fix.


The ID verification programs you mention either need to be reworked to support macro mode like Apple's Camera app or they need to be able to deal with a smaller apparent ID area in a photo from further away.


The camera system has a longer minimum focus distance, that's a physical parameter of the larger sensor used in the iPhone 14.

That's because they are likely trying to fill the camera image with the bar code rather than back off until the bar code is in proper focus, or the AssetTiger app needs to be updated.


I've yet to find any barcode my 14 Pro Max will not scan using standard tools.


Download and try the free "Scandit" app; if it can scan it, but AssetTiger cannot, that's purely AssetTiger's issue.


For example, Scandit scanned the sample bar code on the left from the AssetTiger website immediately as a "1D Industrial" bar code (AT-1008).





Can confirm. Same issue with all pro 3-camera models. It's not only about QR, there are a lot of KYC apps that require to scan documents and ID-cards. These apps rely on the standard API of the phone to take a picture and the iphone is always giving them access to the main camera. These are not specialized camera apps. They don't have a custom library with raw access to the camera, they use the OS's public API which reports a single camera, not 3 separate ones. The app does not know how many lenses there are, it sees only 1 camera (probably the selfy camera in addition). Apple needs to provide automatic switching to macro mode when camera is accessed by the API, so apps that need it should not rewrite everything from scratch just to add some non-essential feature. Apparently this problem is quite old and probably won't be addressed anytime soon, meaning end-clients will struggle and suffer..

Hello brocklame,


Is the camera working as expected in the Camera app? If it is, then we would suggest you work through these steps found at If an app on your iPhone or iPad stops responding, closes unexpectedly, or won’t open - Apple Support


1. Close and reopen the app
Force the app to close. Then open the app to see if it works as expected.
 
2. Restart your device
Restart your iPhone or restart your iPad. Then open the app to see if it works as expected.
 
3. Check for updates
To see if updates are available for the app, open the App Store, tap your profile icon, then scroll down to see if updates are available. If updates aren't available for the app, update the software on your iPhone or iPad.
 
4. Delete the app, then redownload it
Delete the app. When you do this, you might lose data that was stored in the app. Then redownload the app. Then check to see if the problem with the app is fixed.

 

If these steps do not resolve the issue, reaching out to the developer may help: How to contact an app developer - Apple Support


Have a good day.



Sorry Dogcow-Moof, you are in the wrong. If Apple introduced feature, that 3rd party developers need to implement switching to macro camera (and did not tell them), then this is epic fail from their side. 15 pro has is as well.


Try Revolut app and try to add a card using camera. You will not be able to, because this app forces you to fill the rectangle with the card and therefore dictates you how far away you should be. The same issue is with any app where you need to provide your ID card to verify identity. And please, dont tell me to contact Revolut myself to fix it. We pay to apple premium because "it just works". However, in this case it clearly does not.


So no thanks, your advices to be more far away from code are completely useless and the issue is major problem that Apple completely underestimated and you are bagatelising it all over again.


My previous SE 2020 (budget product line) works flawlessly, I regret upgrading to this "flagship".


I am attaching screenshot from forti client two factor authenticator. Even their devs are more aware of this issue than you are. So can you please get there any Apple representative to finally take a look at this?


This changed on the iPhone 14 with a recent software update. When I got my iPhone 14, I could import all my Google Authenticator codes by scanning the QR code from the screen of an iPhone 8 without a problem. I added two more codes to the iPhone 8, and now I want to export them to the iPhone 14 by scanning the bar code on the iPhone 8, and the image on the iPhone 14 is all blurry, cannot scan it.


This is a software issue affecting the camera on the iPhone 14, is not the apps scanning bar codes.

The issue is that it doesnt actual focus.


Ive had this issue for a while now and finally decided to see that I could do fix it so its interesting to see that it looks like it hasn't been solved and some are saying ... "There's nothing to fix." There clearly is. Most 3rd party pass will not scan QR or barcodes because it doesnt focus. Sometimes Im back to manual focus by pulling the device away far enough ... but most of the time then the code is too small to actually scan. Huge pain in the butt.


It happens with me on several apps like:


Amazon Alexa (scanning a device)

Google Authenticator

Blink Cameras.

In fact, the built-in QR scanner (accessible from the clock dropdown) is not switching to Macro, neither allow zoom-in or implement any of the Apple's own suggestions


It doesn't need to switch to macro.


Just back the camera away from the code until it is in focus and it will scan immediately.


You do not need to fill the marked area on-screen with the code.

It does focus, but it will not focus if you try to hold your device too close to the code.


If you hold your device far enough away from the code for the camera to focus, the code will be read instantly.


The code in no way needs to fill the "box" apps draw to put the code into, merely a small fraction of it.

I don't see that and there are not other complaints about focus issues with a recent update.


Also make sure the camera lens on your iPhone 14 hasn't been smudged.



This software toggle automatically between lenses. 99,99% of other software don’t do that and will never do.

It would not explain why local camera apps has no issues with a clear closed up image. It does not just affect scanning of qr codes. Closed up Photos and videos in general are fuzzy and not sharp at all on 3rd party apps on my iphone 14 pro.

Hi Dogcow-Moof, this is exactly the problem. Some qr codes are too small and there is no possibility to read them.

Some bar codes are not perfectly printed, so we need to go closer, but in this situation, camera goes out of focus.

When the developer choose "rear-camera", OS need to toogle automaticaly to macro lenses when needed.

That's just it, there aren't QR codes that are too small to read; I just used Code Reader to read one of the smallest codes I could find at 3/8" square; perhaps you can point me to smaller ones.


The camera doesn't go out of focus, in fact it gets in sharper focus as you move away.

Dogcow-Moof, you seem to dismiss everyone's complaints about the inability to scan barcodes and QR codes. I raised this issue late last year when I changed from iPhone 11 to iPhone 14 Pro Max. I called the third-party vendor of the barcode scanner developer, and he said Apple needs to fix it. Now I see you state that the 3rd party vendors need to fix their end. To this day, I cannot scan bar codes affixed on many of our company assets with my current phone 14 Pro Max. We rely on a couple of individuals with an older Android phone that works perfectly. I regret switching to the iPhone 14 Pro Max.

They are incorrect.


I've yet to find a bar or QR code I can't scan.


Download and try the free Scandit app; it seems to be able to scan virtually anything.


Don't try and fill a box with a bar code, simply back up to where the bar code is in focus, it seriously works every time.


If you really regret switching, sell your iPhone 14 Pro Max - they retain their values well - and purchase an Android if that would make you happier.

Which software are you referring to?


Scandit works really well, and if it can do it, other app vendors can too.


If other app makers don't want to put in the effort, that can't be helped and is no fault of Apple's.

The problem is not the camera app scanning barcodes, but apps that use the camera to scan bar codes.


One example: Google Authenticator. When you use the app to scan a barcode, in my case transferring my Google Authenticator accounts from an iPhone 8 to the iPhone 14, the iPhone 14 could not scan the Google Authenticator's produced bar code on the iPhone 8, because it was blurry on the iPhone 14.

OK, try an asset tracking app: AssetTiger.

We have 18 out of 31 individuals who cannot scan the AssetTiger-generated barcodes with their iPhone 14 Pro Max due to blurriness. The remaining individuals can read as before since they have older phones, iPhone 11, and some Android phones. If numerous users claim iPhone 14 Pro Max blurriness, your dismissive response is not welcome. We should let an Apple Professional provide a solution, not avoid the problem.

Hi there, it seems to affect all 3rd party apps. Google lens, whatsapp, telegram.. to name a few. ios 16.2 did not help with this issue.

Nothing to worry. There is a simple solution for that: ALL millions developers over the world just need to update their apps....

Even code scanner app from control center does not focus correctly qr codes.

This is an iOS problem that must be fixed by Apple!

It doesn't work. That's the problem most people are complaining. The Camera App re-focus when you move in and out, lots of apps don't.

I have this issue when using Skype and zoom, and taking a photo for ID verification with the likes of Revolut and Wise has been a nightmare. Very, very unimpressed with this and lack of progress with a fix (now on iOS 16.2 and no change).

They all do, regularly.


Look at your App Store listings and see how frequently they do; for some its more often than once per week.


Certainly they will if their app is not functioning properly with a new release of iOS, and if they don't, people stop using their app.

You can't hold the phone up next to a blurry code to fill the code box, but rather once you get the phone far enough from the code that it can focus on it, it will read it perfectly and will take the appropriate action.

Here is a sample image taken with Code Reader that shows you the size of the QR code as it begins to focus on it and it is then interpreted and opened in Safari.


I've whited out most of the photo as this isn't intended to be an ad for the product, just to show how far away from the QR code you should be; the actual size of the QR code on the package (not including the white box around it) is approximately 5/8" square.


That isn't true; the phone can properly scan codes of quite minuscule size, it doesn't need to fill or even come close to filling the scan area of an app.


For example, I can scan a QR code just 5/16" square from 6" away with my 14 Pro Max (both using Apple's Code Scanner as well as the third-party Scandit app.)

So I wonder if apple is aware of this problem, clearly many people are commenting on this issue.


i was photographing a wedding and the guests wanted my contact info. I had them scan a digital business card. In one group of people all of phones read the QRL code, except one person.


They had a brand new iPhone 14!!!


Come on Apple ! At this point my upgrade from 12 pro to 14pro, not worth it.


They were likely not scanning the card properly.


I've never found a QR code an iPhone 14 family phone won't read if you don't try to do something like hold it too close to the phone to try and fill the "box" with the code.

Which third-party apps fail for you?


I've yet to find one, including Amazon, King Sooners (Kroger), Scandit (of course) and Walmart (Walmart Pay).


Remember, don't fill the code "box," back the camera up until the code you want to scan is in focus.

Let's see, Asset Tigers labels (over 1000) barcodes previously could be scanned with all of our company phones (iPhone 11 and Android) late last year. Some have received upgraded iPhone 14 Pro Max and cannot scan using the same Asset Tiger application. Also, others have repeatedly reported that they are having scanning issues with the iPhone 14 Pro Max scanning barcodes, and your only response is that we are doing it wrong or that the app we are using is the problem. If you have no issues, let an Apple expert address these issues for the rest of us, and don't speak for Apple.

Again, though, most apps that need to scan QR or bar codes do the right thing when the code is in focus no matter how small the image may seem to you.


The problem is when people try and fill the "box" on the app with the code, holding the phone at a distance at which it cannot focus.

If the Revolut app "forces" you to fill a rectangle with a card and you cannot, that is up to the app developer to fix.


For example, you don't need to fill the marked area with a card for Wallet to add it to Apple Pay.


Only Revolut can fix their app if it works as you describe.


It is the responsibility of third-party app developers to make their apps function properly with Apple products.


https://www.revolut.com/en-US/contact-us/

In what way?


As I mentioned, most every third party app that reads bar codes or QR codes has no issues if you move a little farther away from it.

However, am agreement that at a distance, photos and videos are fine. My doubts are why the phone would be blurry at closed up. My iphone 11 has no issues with this

I have done all of the steps listed minus contacting the 3rd party. I did not have this issue on iPhone 12 Pro. Seems like a software issue.

When you pull the code away from the phone the code is too far from the scanning area to properly scan.

Sometimes I need to put a glasses in front of iPhone camera to it read properly the codes.

So, I suposed that iPhone need glasses now...

You right, but the print must be perfect condition.

if the print is a little badd, it won't work so good.

That goes for any code reader, not just Apple's.


If the code is too fuzzy the elements of the code can't be read.

That’s correctly. I can’t even take a picture from a card in WhatsApp. Need to take the picture using camera app 😤

Move the iPhone 14 away from your iPhone 8 until the code is in focus; you don't need to fill whatever box Google may be putting on-screen with the code.

Just switched from the 12 pro to the 14 pro. Never had this issue before. I can confirm it’s all 3rd party apps.

My scanmarker won’t read aloud on my MacBook air