Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Brother scanner doesn't work after Ventura upgrade

I have a 2017 Macbook Pro 13-inch, serial # FV***V22. I recently upgraded to Ventura 13.0.1 and now my scanner won't work. Previously I would got to System Settings, click Printers & Scanners, and click the Open Scanner button. Since the software upgrade, when I click the Open Scanner button, a new page opens with the name of my printer at the top (Brother MFC-J870DW) but nothing happens after that. I was able to use the scanner with an app (Brother iPrint&Scan) but regret the loss of innate scanner ability


[Personal Information Edited by Moderator]

31 replies

Just went through this and had to

1) Delete the printer from my iMac (Ventura 13.1)

2) Download and update the driver from Brother

3) Download and run the firmware update tool from Brother

4) Restart my iMac


Now the scanner is working and with full features.

I am sorry you are having scanner problems. If you will bear with me, I will offer some things to consider which may be useful. Whenever we install an operating system upgrade or some OS updates, printers and scanners will often stop working. Then a new OS compliant software must be installed for the scanner to work. Experience has shown that many printer/scanner manufacturers are very slow to provide updated software. What you can do is to thoroughly check theBrother web site for updated compliant software that works. If none is available, then you should ask when it will be released. If that doesn't work, you can try scanning using Apple's Image Capture app. It will scan, but is not full featured. Another alternative is to download and try the full featured scanner software from VueScan. You can try it for free. It will show a watermark until you purchase it. I bought it and can recommend it. I have no association with VueScan. Good luck.

VueScan Scanner Software for macOS Catalina, Windows 10, and Linux


I just checked Printers & Scanners and discovered I had two entries for the printer. One had Driver Version 3.0; the other 4.0.14. I deleted the printer with the older version and now scanning works with Brother app.

I'm guessing that one of the updates might have caused this issue.

I am sorry you are having scanner problems. If you will bear with me, I will offer some things to consider which may be useful. Whenever we install an operating system upgrade or some OS updates, printers and scanners will often stop working. Then a new OS compliant software must be installed for the scanner. Experience has shown that many printer/scanner manufacturers are very slow to provide updated software. What you can do is to thoroughly check the vendor's web site for updated compliant software that works. If none is available, then you should ask when it will be released. If that doesn't work, you can try scanning using Apple's Image Capture app. It will scan, but is not full featured. Another alternative is to download and try the full featured scanner software from VueScan. You can try it for free. It will show a watermark until you purchase it. I bought it and can recommend it. I have no association with VueScan. Good luck.

VueScan Scanner Software for macOS Catalina, Windows 10, and Linux


You say that you downloaded the latest driver. My question is:

  • Is that driver specifically listed as being for your specific printer?
  • Does that driver say it works with your specific version of your computer's operating system?

If the answer is yes then I recommend that you contactBrother's support site for assistance. As noted above there are alternatives available to make your scanner function. VueScan will work with any fairly recent scanner.

Aha. Shared devices looks grayed out. But... if you hover over it and click, devices magically appear. I got a scan. I had to discover that you can set dpi if you click "Show Details". It should also say "Set". Thanks. (I did already get the current job done with my HP Printer when I discovered it was a Brother only bug.). Hopefully, Brother comes out with a new driver soon. I can now wait.

First step is to delete the printer/scanner from Printers & Scanners in System Settings. Then try to add a new printer, which should provide the latest drivers automatically. Solved the issue for me.

The official response from Brother:


With that said, you may be able to use the Image Capture app instead of the Open Scanner in Settings. That is the first thing I would try. If the standard ICA driver that is provided with the OS is unable to detect your scanner in Image Capture, then you will need an ICA driver from brother. Since they choose not to support Ventura, you may be able to find it in a different model from Brother. They say it is included with the Printer Drivers that you can download, but don't know if they give you the option to just install the ICA driver without the printer drivers.

I had the same issue. I updated to the latest driver, but no improvement. Brother is not going to update my model support.


The work around I found is to create a new printer, that is "Control panels-> Printers and Scanners-> Add printer, Scanner or Fax". For me (a brother MPC8680DN) it comes up in the list. Select it and give it a new name, perhaps with a number at the end. Like Upstairs Brother 2023-1. It works for 3-7 scans, then you have to create another printer with a new name. Don't worry the control panel will let you delete the old ones.


My guess is there is some form of access restriction, maybe with removing or rewriting a file. Hoses the system, but gets recreated with a new printer activation (new folder I am sure).


Hope that helps someone.

Image Capture works (check Shared devices), as does VueScan.

Actually, I just tried Image Capture and that worked for me.

Just got off chat with Brother and they don't have any intentions of updating their drivers and apps and, therefore, will not be supporting Ventura. I have a MFC-9970CDW with the same issues. I can print but just tried to scan to send tax stuff to my accountant and found out I can't scan. Bottom line is they want you to buy a new printer!

I'm glad you found a solution. VueScan usually works well, but if it doesn't work with your unit I would check their web site to confirm whether is is supported. Sometimes they have to release updates that will work both with a new OS and a particular scanner.

If your scanner doesn't work, there is nothing for image capture to connect to.


If you are using the manufacturer supplied scanning software and they don't offer an update, Image Capture is definitely an option. Image Capture uses a standard ICA driver for scanning, which completely bypasses the outdated scanning software supplied by the manufacturer.

Definitely a problem. Brother iPrint&Scan no longer works. Other software such as VueScan has no problems.

I see that if I uninstall my Brother l2740dw and reinstall it, the scanner works for a few minutes, then stops and reverts back to a grayed out scanner on the screen. So I have to keep reinstalling the printer every time I want to scan. But not if I only want to print. Any help greatly appreciated.


Hi, I'm having the same issue after I upgaded my Mac OS to Ventura. I tried downloading VueScan but that isn't working either. I also tried the additional tips provided below on this thread but no luck. Any additional thoughts on what might help me get my scanner to work? Any help is greatly appreciated.

Ronasara,


Yes, I did see it and opened Image Capture and don't see any way to setup the scanner. My Brother Printer, Scanner, Fax is in my OS config so not sure what else needs to happen to get Image Capture to recognize my device.


I have not tried VueScan but need at least the $50 version to support scan to PDF and document feeder. At this time I am just moving files to my wife's Windows machine that still supports the Brother app and drivers. Not the best approach but works and need it right now.

Same thing with my Canon. They are no longer supporting after Catalina. Image capture doesn't work as it needs a camera or scanner so not sure why people are recommending it. If your scanner doesn't work, there is nothing for image capture to connect to. I don't scan often so I'll find somebody with a scanner. I refuse to buy another one-this one is perfectly functional. Planned obsolescence in another form.

on the VueScan  recommendation.


I just discovered my Brother scanning broke recently. Now I see it is universal. This really sucks!


I tried Image Capture for the first time ever. It says "No Camera or Scanner Selected." And no way I see to select one!

brother scanner doesn't work after Ventura 13 upgrade on my Mac

Please see my entry above. I offered some viable alternatives you can use.

I might do that, but zero chance it will be from Brother!

Correct, Brother already told me too bad...

I have a Canon which will not support Ventura and doesn't plan to. Image capture requires a device connected to it so I don't know how it would work otherwise.

Vue Scan didn't work for me. It says it accepts my scanner but then zip.

Apple's Image Capture app worked. I didn't realize that it was the same thing that popped up when I clicked on 'Printers and Scanners' and clicked 'Open Scanner'. Why it no longer works like before doesn't matter now that I've found Image Capture.