Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Problem saving print presets in Ventura

I can’t save changes in print preset since upgrading to Ventura

60 replies

Give this a try: boot into Safe Mode according to How to use safe mode on your Mac and test to see if the problem persists. Reboot normally and test again.


NOTE 1: Safe Mode boot can take up to 3 - 5 minutes as it's doing the following; 

• Verifies your startup disk and attempts to repair directory issues, if needed

• Loads only required kernel extensions (prevents 3rd party kernel/extensions from loading)

• Prevents Startup Items and Login Items from opening automatically

• Disables user-installed fonts 

• Deletes font caches, kernel cache, and other system cache files


NOTE 2: if you have a wireless keyboard with rechargeable batteries connect it with its charging cable before booting into Safe Mode. This makes it act as a wired keyboard as will insure a successful boot into Safe Mode.


I have had problems with Lightroom Classic crashing with Ventura when I changing print settings (reported here https://community.adobe.com/t5/lightroom-classic-bugs/p-print-module-page-set-up-crashes-lightroom-classic-v-12-0-1/idi-p/13326937). Started back in November 2022 and in my case went away when I completely deleted and re-installed printer drivers. (Others had to wait till the most recent Ventura update - almost 6 months!!).

But when the crashing stopped it appeared my saved print settings for different papers had gone too.

Since then I have experienced issues described here: in LR Classic settings for media and quality revert to default however many times you save them. The custom presets for e.g. printing on glossy paper are all listed but when I choose them they turn out to be default settings ('plain paper' every time). I downloaded a trial version of dedicated printing software in the hope that would provide a way out, but the problem is the same, or even worse (it looks as if the settings are not even saved for the specific job in hand). So it must be an Apple issue.

The funny thing is: someone mentioned they could create presets using the program Preview, which apparently shows different behaviour.I realized that in my case too only Preview gives me a list of standard Epson printer presets (glossy paper, archival matte etc) that should always be there. These standard options I don't get to see in Lightroom. And indeed, when I saved a preset in Preview it showed up as stable preset in LR. It makes no sense but isuseful as a workaround.

For these simple prints I don't use ICC profiles so I have no experience to share with this aspect.

Give this a try: boot into Safe Mode according to How to use safe mode on your Mac and test to see if the problem persists. Reboot normally and test again.


NOTE 1: Safe Mode boot can take up to 3 - 5 minutes as it's doing the following; 

• Verifies your startup disk and attempts to repair directory issues, if needed

• Loads only required kernel extensions (prevents 3rd party kernel/extensions from loading)

• Prevents Startup Items and Login Items from opening automatically

• Disables user-installed fonts 

• Deletes font caches, ke 00004000 rnel cache, and other system cache files


NOTE 2: if you have a wireless keyboard with rechargeable batteries connect it with its charging cable before booting into Safe Mode. This makes it act as a wired keyboard as will insure a successful boot into Safe Mode.


Hi all,


I'm a professional printer and photographer, and I've seen (and privately ranted) about this problem for a while; it continues to be a problem in Sonoma. However, I have had luck with the following procedure:


  1. In Photoshop 2024 > Print > Color Management, select Photoshop Manages Color and the appropriate ICC profile.
  2. Open Printer Settings in Photoshop 2024.
  3. Under Printer Options > Color Matching, check to see if the options are still greyed out and that the printer is managing colors (despite your best intentions).
  4. Save the settings.
  5. You should get a dialog warning that the color management settings are in conflict. Click ok.
  6. Now, Photoshop will show Printer Manages Settings under Color Management. That's okay for the moment.
  7. Set your Color Management back to Photoshop Manages Colors and the appropriate ICC profile.
  8. Open Printer Settings again and check the Printer Options > Color Matching. ColorSync should be selected, despite the radio buttons being disabled.


I'm unsure why this happens, but my hunch is that Photoshop needs the two-step process to update the override of Sonoma's control. It is a pain, but it seems to be successful. Cheers!

It looks like the problem is with the Paper Handling option, that saving that as part of the preset is the part that's not working. Saving the "Media Type" with vendor drivers worked when I tried it.


Is there a reason you are using Paper Handling and not the Paper menu above? The setting of the paper menu is saved as part of the preset, but that may not get you what you want.


Hope this helps.

Following up on my post from earlier today, I have come up with a workaround. If I define my print presets in Preview instead of in Photoshop, the settings are properly recorded. I can then successfully use those presets to print from Photoshop, as long as I don't change any settings from the values in the preset.

As for saving presets I have now investigated furter what I can do using the Preview app. When I choose the printer I can access the ICC profiles under the 'color management' settings, selecting color sync and an ICC profile. There are a number of profiles linked to the printer's manufacturer (in my case all Epson papers) but it looks as if you can click furter to access all ICC profiles that you use.


I selected an Epson profile, glossy paper and paper size (including the right feeding tray and borderless), and saved this as 'print job preset'.


(I'm still not sure what the difference is with custom preset but an explanation I found says " Custom presets can be used in conjunction with print job presets to fine-tune the settings for a particular print job."https://www.hawkdive.com/how-to-fix-ventura-not-saving-printing-presets/)


I then opened the printing module in Lightroom, the preset was there, and selecting it indeed gave me the right settings. It still reverts to default after one printing job but at least you can change all settings by just choosing the preset.


I also noticed that although when defining the preset in Preview I chose a paper size, that was overruled by the print settings defined in my templates. So that works okay.


I could also in LR print module define the printing settings for an existing template for Epson printer and Epson paper (so that the right type and size of paper is chosen when selecting the template; button 'print settings' bottom left). I could also save this to the template (right-click on template: adapt template wit present settings). So far so good.


The Epson profiles are readily available, at the bottom of the list there is a choice 'other profiles'. When I tried to update another template and selected one of these 'other profiles' LR crashed. Four times, no coincidence.


Choosing this profile in Preview seemed to work. But when I selected this saved preset in LR the profile had reverted to an Epson profile (not similar, but completely wrong). When I tried changing it in the existing preset LR crashed.


So I can create presets for the combination Epson printer - Epson profiles, but I cannot save presets with other profiles. And I do not use Epson papers.

This is a different issue than the Paper Handling issue above - that affects all printers, AirPrint and vendor. This is likely the known issue with saving the paper tray setting with vendor drivers. There isn't a workaround for saving that setting.


Feedback - macOS - Apple


Hi all


Just loaded os14 (Sonoma)and presets are now fixed in this os..

Color Sync issue causes double profiling


PS 24.1.1 / Ventura 13.2.1 (22D68) / Apple M1 Ultra 128 GB

In the print dialogue, under Printer Options / Color Matching the Color Sync setting is grayed out. In the following, the Default shows the radio button set to Color Sync as it should since PS will provide the ICC profile. The setting is copied to a new preset "Han Luster Sheet". When viewed, the new preset is no longer set to Color Sync, but to Epson Color Controls. This results in double profiling with colors grossly off. Since this dialog box is grayed out, it cannot be set back to Color Sync.

This is still occurring having deleted the printer in MacOS and via Epson's Uninstall, and then reinstalling.

Printer driver is Epson 12.62 (current for Ventura) for P7000. Same behavior after a complete print system reset.


As I was working with other vendors who have printing systems that operate outside of the Adobe environment, it seems there is a general failure to "remember" various preset settings (including sheet or roll paper):


...there are some bugs in the Apple print system in Ventura which can cause driver settings not to be remembered. This issue is not specific to [product name] but is a bug at the system level.

Mac OS previous to Ventura, such as Catalina and Monterey work fine for printing with working ColorSync/ICC management with Adobe CC apps like Lightroom CC and Photoshop CC. Ventura definitely breaks ICC pruning from Lightroom, which no linger works as it used to, though I got Photoshop to sort of work properly (but with having to set printer options manually for every print). The Lightroom ICC issue seems to be a separate issue to the Print Presets issue, but perhaps just reflects a different aspect of buggy code underneath the print dialog in Ventura.


For theaudiodoc, I would recommend backing up and reinstalling Big Sur or Monterey Mac OS. PITA, sure. But, it will be less painful in the long run than putting up with the broken printing from Ventura.

Apalca,


I got an email copy of your message, but don't see it here?


The settings in the Apple module won't stick no matter what! Using the Qimage One app, you set everything in Qimage, printer name, media type, paper size feed type and paper ICC profile, when you have the exclamation point in the print settings box, you go once to the apple print module and make your settings and then you get the green check mark in the printer settings box. Qimage support told me not go and look at them again, they won't have stuck. In any case I'm now getting good prints on my old R1900. Before, from LR Classic or On1 Photo Raw, they looked like they were double profiled or the incorrect profile.

I

do still have an issue with any paper that requires the rear feed on my printer. I have not been able to print on any heavier fine art type papers.

I'm not an expert at any of this. Still have a lot to learn. But I've read that you should make sure you are using drivers from your printer manufacture and not Apple drivers. If you are using Epson papers make sure you download and install the driver with ICC profiles and install that. In my case, somehow I managed to have only the driver installed. I downloaded the ICC profiles separately and most of them wouldn't install in Ventura because they were 32 bit and Ventura is 64 bit only. I reset my printers and started over with Epson drivers installing the photo printer first and then my Epson WF3640 which I use for document printing and scanning.


Anyway as I think I mentioned, I've migrated from MS Windows 10 where I never had any of these issues with printing photos. Its really quite shocking that this is even possible with Apple! I expected better!

Of course IMO Epson is not blameless in all of this. At the very least they should be working with Apple to get all of this fixed. In my case, with an old printer like The R1900 I don't think they care. I'm sure they'd like me to buy a new printer. One thing is for sure. I'll be more careful about installing Mac OS updates. I should have learned my lesson with updates to Windows 10 -- invariably something didn't work after Windows updates.


FWIW, I understand there were some bugs with ICC profile up to a point with Big Sur, which is what my MacBook Pro and Mac Mini M1 came with. I regret updating, but honestly, I had not yet made any photo prints with my R1900 at that point, so I don't know anything about how the print module worked, other what others are reporting.



Please check the discussion and procedure outlined here by Geoff here by Geoff https://community.adobe.com/t5/lightroom-classic-discussions/printing-with-icc-profile-from-lrc-looks-terrible-but-quot-managed-by-printer-quot-looks-good/m-p/13525618#M308338 For me this workaround solves the problem. This discussion was an eye-opener for me in that it pointed out where you should choose which settings. The printer interface now invites you to choose settings which you should not choose because Lightroom or Photoshop handles those aspects. You can save your preferred settings (for paper type and size) when you tie them to a print template in Lightroom (if you use that). To help you choose your settings in the right place Geoff has described the procedure in detail, and I think it makes sense. (The print interface does not, of course, that's why we ended up here.)

Ventura Print dialog does not save critical settings to Presets. This is a huge issue for photographers like me. Print presets must save Color mode, ICC paper profile, Paper type, Print Resolution/ Print Quality, and other features, but it saves NONE of these consistently. This makes top quality photo printing using Mac OS Ventura impossible.

I was also having this problem, too. I went out to my Brave browser, changed the printed and saved the settings in Brave. Now they're showing up properly in my graphics program. I don't know what all programs this workaround might work on, but it's simple enough to try.

I have read this thread and the procedure outlined here by Geoff https://community.adobe.com/t5/lightroom-classic-discussions/printing-with-icc-profile-from-lrc-looks-terrible-but-quot-managed-by-printer-quot-looks-good/m-p/13525618#M308338 I think this makes sense. I seem to have been led astray, as have many others, by the changes in the printer interface, to define and save things in the wrong pace, thereby causing conflicts between settings. Geoff's procedure helps to do steps in the right order and avoid settings to revert to default etc. So you can get your printing done.


The fact that you need such guidance to avoid losing settings you had already defined or ICC profiles not being used or LR crashing only proves the print setup has been completely messed up.

What really helped me was the point underlined in this other discussion a.o. by digitaldog: that you should choose your profile in LR and not choose it (again) in printer settings. Because it is LR that handles color management and consequently the printer doesn't -so no printer-ICC-profiles need to be set.


Of course, the whole setup and the interface are too confusing in this respect, it really is a mess. But Geoff's instructions helped me to understand and find a way out of the wood. He also uses an M1 Mac mini so I would think that what works for him should also work for you. But perhaps logical thought doesn't apply here :-)


For me it was encouraging that he uses the same -old- printer I use. Good to know that the printer doesn't have anything to do with the problems we experience. I'm confident I will now be able to do my printing -very relieved, for the prospect of the alternative (downgrading ) wasn't very attractive.


I hope you can get it sorted out to - good luck!



No, there has been no update or fix from Apple! There are workarounds for applying the proper ICC profiles for your printer and paper combination, but you will need to read through this thread and related links.


As for no access to the print dialog box, it is not clear to me what is happening with your system. The first thing you need to do is go to settings, printers and scanners and make sure your Canon printer driver is installed. You must use the Canon driver. Do not let Apple install a driver. If you don't see your printer listed, go to Canon's site and download the driver for your printer for the Ventura operating system. That driver should included printer profiles for Canon papers if you are using those. If you are using other papers you will need to get those ICC paper profiles from the paper manufacturer.


So the problem with Ventura is applying the correct printer/paper ICC profiles and related settings and having those settings remembered. You have to follow the correct procedure. If you are using PS and LR, this topic is also covered over in the Adobe user forums and other photo print related forums. Apple has a new OS coming soon which I would hope fixes some of the photo printing issues, but personally I doubt it. I don't think they are listening to us.



Thank you.


Can you add more specifics? What type of printer, vendor or AirPrint? Where are you changing the paper type? In Media & Quality?


When you say "exit and then go back in, the paper size has reverted to the default", what's the settings of the presets menu? Just making sure it's not set to the default. This is probably a legitimate bug, but maybe I can see if there's a workaround by following the precise steps.

Hi John


Thanx for the quick response. I have the same problem with paper handling ..On the earlier versions, os 11 , 10.15 and earlier, would save the full preset(all settings that I selected) my work around now is to use Cups and save my defaults. So now instead of having 6 different presets, I have 6 different print drivers.. this is using the genuine print driver, not the air-print driver..

I first heard about the presets not saving when I watched a tutorial by Hudson Henry on the On1 Photo Plus web site. He gave viewers a "heads up" that the print settings preset did not work in Ventura. I then verified this. Since then I'm reading about the problem in various places.

I have the secondary and really major problem that the drivers is somehow not using the correct ICC profiles for printing. My prints are lacking in contrast and deep blacks. This also seems to be an issue that others are having.

Unfortunately I never did any photo printing from Big Sur before I updated my Mac Mini M1 to Ventura, so I don't know how the Epson print driver worked with it. All my previous printing was done on my Windows 10 PC and my prints always looked like what I saw on my calibrated monitor and with soft proofing. So I did a comparison of a sample print with Windows 10 and Ventura and verified Ventura isn't printing with the correct (selected) ICC profile. And yes, it is upsetting that neither Epson or Apple acknowledge that there is a problem. Epson support wanted to see my nozzle check prints etc! :-). Of course as for the print quality problem, I can't rule out that I am doing something wrong when printing in Ventura, but I've gone over my settings multiple times and can't find any error. Not saving my presets does not help of course.

Everybody, please report the printing issue you have with Ventura to Apple Feedback, please. Perhaps if they get some more complaints they will investigate the print preset bugs. Go to : Bug Reporting - Apple Developer

(You might have to sign up as a Developer, which is easy to do).

Well that means support is indeed reading these posts, so someone is aware that we are having these issues! I did read your message about rolling back to Monterey. Thank you!

I installed Qimage One and am able to get good prints now with the correct profiles. Don't need to worry about print presets in Ventura. Qimage does that for me. Shouldn't have to use a work around whether rolling back to a previous OS or installing third party print software. Apple should just fix the print module in Ventura!

Thank you @theaudiodoc for your complete report of your experience. Funny that my post is no longer on this page, I don't know how that happened. But then as this thread proves there are many thing happening we don't understand :-)


I updated to Ventura from Mac Catalina, and with Catalina everything worked fine -presets, printer settings, I had it all organized and it worked perfectly. Provided, as you mention, that you use drivers from the printer manufacturer (that in itself is a maddening thing: why should Apple in its arrogance silently replace original printer drivers with their own versions -who asked for this? When for some reason you re-install a printer you may fall into this trap any time.) So I share your frustration, only in your case I think it's probably worse, switching to Mac and ending up in this swamp.


From what you write it is clear there is no solution, not even with external software like Qimage. As I may have to do quite a lot of printing the coming month I think I'll downgrade to the oldest supported OS version, perhaps even Catalina. At least I can then rely on my system to do what it is supposed to do. I also have a fairly old printer, a Stylus Pro 3880, so yes, I agree, possibly these old printers may be abandoned by Epson and we shouldn't count on updated drivers.


To me too it is incredible that these problems occurred in the first place - the only application that seems to handle printing almost as you would expect is Preview (I can save custom settings there and when I choose a custom preset the settings are correct; but I have to make this choice for every single print as the thing always reverts to 'none' instead of keeping the latest settings). It is as if Apple developers only tested printing for a few Apple programs. What I find even more shocking is that this has now been going on for half a year! Half a year during which people could not properly use their printers on which they are dependent for work, orders, assigments.. And not a word from Apple...

Have the same problem, if i go to:

1- printer options

2- Paper Feed

3- select tray 4 ( for example) I have my silk paper in this tray...

4- save this as a All printers- Print Job Preset ( call it Tray 4)

5- press print and it prints from Tray 4


Open another PDF and choose the :

Tray 4 preset

and my Paper feed Preset has reset itself to Auto Select


I Have Ventura 13.1



Has there been a fix for the Printing Preset problem? We depend on this feature for our community college digital printing lab. We are running the latest version of Ventura and are connect via USB to Epson P5000, 6000, 7000 printers, printing from Adobe PS or LR. We have been using Mac Printing Presets created in the Mac OS Print dialogue box for years. Nothing saves, custom paper size, and especially irksome is the inability to save Printer Options>Printer Settings> Media Type or Adv B/W, etc. etc.

Is reverting back to Catalina the only fix?


You probably don't need to revert all the way to Catalina. Mac OS Monterey works fine for Mac Pro printing to my HP Z9+ and Epson P600. Before that I was using Catalina on the tower computer, and Mojave on my MacBook Pro laptop for calibrating the HP printer because HP's DesignJet utility was not fully functional with Catalina for over 2 years. Finally HP released an update this year that works with newer than Mojave Mac OS, and I have found Monterey to be a nice upgrade to the original Catalina that was loaded on my Mac Pro. Unfortunately, I upgraded my personal and work laptops to Ventura, so pretty soon I will wipe the personal one and install Monterey on it too.


So I would recommend either wiping and reinstalling Catalina from an old backup or wiping and rebuilding as Monterey. I can't believe Apple screwed this up so badly.

I am having the same problem: unable to change or save printer settings. Ventura 13.3.1 on a Mac Mini M2 Pro, printing to Epson 3880 using Epson driver 12.62, printing from Photoshop with "Color Handling: Photoshop Manages Color". In the Print Settings dialog, "Printer Options > Color Matching" selector is grayed out with "Epson Color Controls" selected. I am able to change settings in the "Printer Settings > Basic" panel (e.g. High Speed), but when I click Save from Print Settings and go back into Print Settings again, my changes have reverted back to their old values.


Oddly, if I instead select "Color Handling: Printer Manages Color", then the "Printer Options > Color Matching" selector is not grayed out and I can change it from Epson Color Controls to ColorSync. This setting of course does not stick, but the inverted disable behavior of this selector might give a hint about where the bug is.



Just my personal opinion, but I think they know about these problems with the print module, but either can't fix them, or there is not enough noise being generated! After all, how many Mac users are printing photos to photo printers? Searching for info, either video tutorials or printed info, it seems more of them are using Windows rather than Mac.


Also, I have been informed by a print software developer that hey have been in touch with Apple in regards to these Ventura bugs so Apple for sure knows about them.


Not knowing the nuts and bolts myself of fixing bugs like this, it may just be them saving face by not admitting to problems with the print module or they don't want to invest the resources to fix them.


I have to admit most everything else with my Apple devices work fine other than external drives connected to my Mac Mini M1 being dumped/corrupted if I don't manually eject them before shutting down, or rebooting.


I think I've mentioned before, but I thought I was leaving this buggy stuff behind migrating from Microsoft to Apple! :-). Such is life!

Apple Support unhelpfully removed a reply to this thread I put up with directions and link on reverting to Monterey from Ventura. The reason they cited was that this is a security risk. Well, it could be if you do it wrong, and leave the option to boot from an external drive still enabled after you reinstall Monterey. Make sure to re-enable boot security if you do this, especially with laptops or machines in public spaces. You can google how to down-date a Mac, and it is not as straightforward as it used to be, but you can do it safely and migrate back all your data from a cloned backup or Time Machine backup of Ventura OS. I won't post a link but a site called AppleToolBox has very good protocols.

I am using a Mac Pro with Mac OS 13.2, an HP DesignJet Z9+ 44" and an Epson SureColor P600, over local ethernet network for the Z9+ or USB connection for the P600. I fear I am going to have to downgrade my Mac Pro back to Mac OS Catalina to get back to consistently working print dialog and presets. I was foolish enough to think Apple would not break important features in their upgrades to the OS. I wanted to have the enhanced Apple ID/iCloud security that Ventura added, but not at the expense of useable photo print quality.

It's shocking that Apple engineers did not test this software to make sure any new features did not break core functionality. Not just for photographers but for business users too. The Ventura print preset disfunctionality also messed up printing to our Xerox color copier at work. I had to photocopy a singe-sided printout of a safety manual at work to make up a couple of binders for users because the PDF would not print-double sided due to the Ventura "upgrade" to the print dialog breaking the printer features I had been using fine in Monterey. This has to be happening to a lot of people.

Having this problem in macOS 14.2.1, going to try the Print System Reset but don't expect anything to help.


I do a lot of printing via shell scripts and it seems like those settings are being honored, but need to do some further testing. Might be a workaround for this, until Apple deems this problem worthy of solving sometime in the next decade.

When I change the paper size and then save as a print preset, exit and then go back in, the paper size has reverted to the default. Pretty much the same thing happens when I change the paper.

Thank you apalca,

My Bad! You reminded me: first step -- set ICC profile in LR. That important step I had spaced out. Now to do some test printing.

I am using an Epson ET-8550 printer connected by Bluetooth. I want to change from A4 plain paper, which is the default to A3 Semi Gloss. I make these changes by going into "Print" from the "File" drop down in "Pages" then go into 00004000 "Paper Handling". "Scale to Fit Paper Size" which is greyed out I hit the button and can then change the "Destination Paper Size to A3. I then go into "Printer Options". "Printer Setting and change the "Media Type" to. Epson Premium Semi Gloss from the drop down. I then save this using "Save Current Setting as Preset" and get a new name. When I go back into the newly created preset it has reverted to greyed out A4 and plain paper.

I am seeing the same problem under Ventura 16.1 and 16.2.


I am using a Canon Imageprograf 1000 printer with a RIP driver Printfab.


I have repeatedly (dozens) of times tried to save various print settings to no avail.


This is a rather significant problem as it leads to lots of lost paper.


Help please.


Bill


For example, when using Printfab with a Canon PRO-1000 printer, I am unable to get any Printfab settings to save. Specifically I have noticed it with print resolution, color space, paper type, etc. I cannot even get it to keep the settings to make one print.

I have tried resetting the print system on MacOS. This did not change the behavior. I.e., I am still unable to get Printfab settings to save in a print preset. This includes print resolution, color space, paper type, etc.


I am unable to print anything, even on a one time basis at this point, and have it end up with the correct resolution, color space, etc. This is a significant problem for my operation.


Currently running Printfab 2.98-1 which is the latest version for Ventura.


Bill


Bernie,


That is a good idea. Given this situation has not yet been resolved and the inability to work on a Mac otherwise, I think I will try that too.


This is a major problem for professional users.


Thanks,


Bill



I read about this issue a lot and I can confirm it. But when I contacted Apple support, they told me they have never hear of it. Apple just released Ventura 13.3 but they tell me nothing has been changed with the printer drivers and settings.

Apparently, no one prints photos in Mac Ventura OS! We must be the only ones! :-). I haven't even been able to find any in depth tutorials on using the Ventura print dialog and ICC profile settings when printing photos either from LR CC, PS, On1 PR or any other photo editor or even just printing directly from the print driver. I read something on the Adobe forums about Epson not placing the ICC profiles in the correct directory in Ventura for use with editors like Lightroom and On1 Photo Raw only in the color sync directory I have not looked into that possibility yet. But the profiles do seem to be working when soft proofing, so I'm not sure if that is correct info.

Re: Apple and Epson support employees: I had the impression those that I dealt with were just using "boilerplate" and stock answers from their computers. The apple support person said he checked with a developer and that person said their had been no reports of problems with the Ventura print driver. If professional photographers are reporting these issues, how can it be that Apple and Epson developers know nothing about it?

I've just reported it - I didn't need to sign in as a developer. I titled it 'Printer Presets broken in Ventura - and still not working with 13.3.'


I got an acknowledgement saying 'Recent Similar Reports:None'. NOT a good sign.


Please everyone: follow Steven's advice!

Indeed these issues are very surprising to me, as I always understood Apple Mac to be the computer of choice to the publishing and visual arts community. Microsoft seems to be more entrenched in the business world. Doing my homework recently on photo printing, I seem to be finding more using MS Windows than Mac. I'm sure it's difficult for these companies to ensure their operating systems work with third party hardware and software. I think MS has more of a challenge in that regard than Apple and yet they don't seem to be having these type of issues with photo printers. I'm assuming newer Epson and Canon printers are having the same problems, but that an assumption and I really don't know.

Hopefully Apple is able to fix these bugs soon.

I found a message in my Spambox from Apple Communities: that they had removed the reply you only received in the mail because "it contained rants or complaints that weren’t constructive." I suspect this is done by the system trained to do a crude sanitizing job - that a human Apple eye is reading this thread is unlikely, given the silence on these issues on Apple's part. [this reply the system will probably also consider to be lacking constructivity :-) ]

Thank you apalca!

This very interesting. Even though I went through the procedure a few times, it never worked exactly the same as it did for you. Mainly the color matching is not greyed out and is switchable. Everything else sets up fine. Interesting I am also using Moab Entrada Rag 300 Bright using the rear feed (manual-roll) with my Epson R1900. The media type watercolor radiant white is now Not greyed out. With Qimage One, and with On1 Photo Raw, under fine art paper, watercolor radiant white and the other selections are greyed out. I haven't tried printing with these setting yet.

Again as odd as it seems, printing is working correctly over on m Windows PC. So the Epson driver in that case is playing nicely with Windows. But I really don't want to have to boot Windows. I want printing to work correctly on my Mac Mini M1.



I'm having the same problem on my new Epson SC 9000 in LR Classic. The print dialog box keeps defaulting to Epson Premium Luster even though I'm setting it to Velvet Fine Art paper. I've tried multiple ways to save a preset with no luck. Settings also default to 8 bit setting when I've set it to 16 bit.


I did just send the problem to apple via feedback assistant.


Has there been any update ob this issue??? I've just got a new iMac ( Ventura ) and was printing with the old iMac and big Sur I believe and had no problems. for what ever reason I have no access to a print dialog box of colour management system. when trying to print from

LR PS OR pro print layout ( Canon image program 1000) the colours are off meaning the way that driver and printer are communicating ain't talking correctly. Does anyone have a work around and or solution??

This thread has strayed.

All I want to do is save settings as a preset. When I print and set each setting by hand, I can print beautifully on the Epson 8550. But...

I go to settings and change these: Rear paper feeder, Glossy Photo paper, etc.


Select my preset:

Select Save Current Settings as preset:


Name it:

Prints normally.


Next print:

Go to settings, and check the "Print Settings" button.

It has reverted to the old settings:


Print settings do not retain changes, even when you press "save" and name it.



Conclusion: Print dialog does not retain saved presets.

Safe mode did nothing. This setting doesn't save while in the same document.

So if I print, and go through all of the baloney like changing paper size, and changing paper trays, and changing paper type, it wont even save the settings from print to print. So every time I go to print, I have to go through ALL of those steps.


The presets do not save.



Can you provide specifics?


There are known issues with duplex and Paper feed using vendor drivers.

Sorry should have said paper type in the last sentence

I am having the same issue. Is there a fix?


I am having the same types of issues as other users in this thread are reporting. I am using Ventura 13.2.1. I am printing from Photoshop 2023 to an Epson P5000. This is a huge pain.

I've just installed the new update to Ventura 13.3.


Extraordinarily, the Paper Feed issue has STILL not been fixed.

It's disturbing that Apple has support employees who are not trained on the very significant changes in the print dialog under MacOS Ventura. It's completely different from recent Mac OS.

Thank you Steven,

I may have to do as you say and revert to Big Sur!

Sadly, Preview suggestion doesn't work for me - even Preview itself still doesn't retain Paper Feed choice.

Since I still had a bootable install file of Monterey (V12.6.3), I created a working version on an old hard drive. If you have room on your system's drive, it could be done there. I then downloaded the current Photoshop (V24.1.1) and installed it on the same HDD. I made sure I had access to the files on Ventura so I could access PS actions that I might need as well as display and printer profiles.


Now I'm able to boot into Monterey, start PS, and pull my image files and print them successfully using the old print dialogue that works.