Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

AirPrint not working after iOS 17 Update

AirPrint was working on ios16 using a Canon printer connected to my home WiFi. I recently updated to ios17 and the printer shows up as an available printer but shortly disappears after selecting it. I am able to print on iPad os 16 and my MacBook Air on Ventura using AirPrint. I’ve reset network setting on both router iPhone and printer and I am still encountering same behavior. Does anyone have any idea on how to fix it or if it is a known bug in ios17? I’ve also restarted my phone and tested it on my partners iPhone which shows same behavior on ios17.


[Re-Titled by Moderator]

88 replies

Blah_blah_011 Said:

"Cannot AirPrint after updating to ios17 on iPhone: Issue was fixed after updating firmware on Canon printer under Menu -> System Management -> Update Firmware”

———-


Updates are what firmware is all about. To get something working as it should with a newer Operating System and to fix bugs, install firmware updates.


Excellent job troubleshooting!

Hi had the IOS 17 air print not working problem, after speaking to Apple support it transpires it was Nortons VPN stopping it working. After removing the VPN bit of Nortons's all is Now working and I am able to print OK.

The Apple advisor is of the opinion that Nortons hs not yet been updated to deal with IOS 17.


As I say All now bck to normal, maybe this will help someone else!

I had the same issue with my Canon MF240 series. I updated the Canon firmware using the keys and screen on the printer itself and now AirPrint works again! On the Canon ImageClass printer, hit the Menu key, then use the screen and navigation keys to select System Management Settings/Update Firmware. (It's the last item on a long drop-down menu). Success!

Can confirm:

Airprint with iOs17 still works, but not on all printer.

My Setup:

-older Printer from Canon (mF240 class) with original Firmware: Airprint works with all iPhones on iOS16, but not with IOS17

-newer Printer from Brother: Airprint works with all iOS16 AND all iOS17 devices!


A Firmware Update from 2021 was available for the older Canon.

With the newer Canon Firmware, all devices with iOS16 AND iOS17 can use Airprint on the Canon Printer!


Two factors causes this issue:

  • Printer suppliers changed or corrected their Airprint implementation some years ago
  • Apple iOS16 worked with old and new implementation, iOS17 only with the corrected one.


If you can’t use Airprint with your iOS17 device; Check your printer supplier. If there is no firmware upgrade: you won‘t get Airprint back. This seems to be a correct implementation from Apple, so there will be no fix from Apple.


Issue was fixed after updating firmware on Canon printer under Menu -> System Management -> Update Firmware

Also, just to clari 00004000 fy- I have a canon imageclass and I was able to update the firmware directly on the printer. I just googled the instructions and it walked me through regarding what settings to go to on the printer to update the firmware. Once it was done installing, I turned the printer off/on just so it would do a full restart and connect to my router and that’s when I was able to resume printing from both my iPhone and iPad.

I would tend to agree with you with most of these steps, but just a couple things to point out. First, I think deleting the VPN profile is necessary cause it seems the iPhone tends to turn it on when it feels like it at times. Like there was a time I opened my VPN app and it was clearly off and I even forced closed it, but Safari still thought I was in Canada. So I had to go into the settings and delete the profile, force close Safari and then it finally went back to the US. But I don’t think it necessary to remove the actual app. Because at the end of the day some ppl need to use their VPN- unless you’re using a browser like Brave that has a built in VPN. Can it cause problems? Yes, so if you feel that both the profile and app need to be deleted, then sure- but remember your VPN credentials if you don’t have them saved on the iCloud Keychain. Second, when “updating” the software on the printer I would say to ensure to update FIRMWARE on the printer. My printer is not fairly new, but I was still able to update the firmware OTA and after doing that- it solved all the AirPrint problems I was having on both my iPad and iPhone INSTANTLY. The only thing I would include is to check which wifi network your printer is connected to. Like I have three: the main one, the 5G network, and the network for my wifi extender. Sometimes AirPrint can’t find the printer if your iPhone and printer are on two different networks. I found sometimes it does, sometimes it doesn’t. But when I updated the firmware on my printer, I made sure my iPhone was connected to the network that I know my printer is connected to- and that’s also when everything started working fine again. So with regards to the iOS 17 update, it has seemed to do something to the phone where it cannot connect to printers with outdated firmware. Because it could still find my printer, but when selecting it - it wouldn’t do anything- but like I said when the firmware on my canon imageclass was updated, it instantly solved the problem. I think the problem for the ppl where this solution is not working is because their printer manufacturer hasn’t adjusted their software/firmware to be compatible with iOS 17 for iPhones/ipads. Yes, it’s true VPNs can mess it it, but at the end of the day the inability to airprint from iPhones/ipads has to do with the iOS 17 because it’s clearly incompatible with outdated or non-current software/firmware that is on the printer they are trying to print to. Because printing from my MacBook or PC to my printer was unaffected. This is an isolated iOS update issue that didn’t take into the account that the firmware on printers would need to be adjusted for it to be compatible. And apparently only some manufacturers got the memo and Canon is apparently one of them cause I haven’t read one other manufacturer that has made the necessary changes unless I missed a reply where it worked for on another manufacturer. Why only Canon? No idea.

I was having the same issue with my iPhone Xs and iPhone 14 after the iOS 17 update, but not my laptop. I have a Canon MF230 printer, and a firmware update was needed. I did the update directly from the printer, and it took about 5 minutes. Now everything is working properly on both iPhones.

FIXED- I deleted the VPN’s from phone, restarted it and it is printing again. I reinstalled the VPN’s and ad blockers one at a time and kept printing until I found the one that was preventing me from printing. I also did update the firmware on my printer.

Thanks. I tried switching the VPN off and it worked. Sent a nastygram to Norton telling them to get their act together.

“SO after a lot of water time I found this comment - spot on. I deleted the Norton app on the iPad and now everything woks properly. If you're running Norton I'd try this first. Once they update I'll reinstall on my iPad.”

———-


Keep Security Software Off of Apple Devices:

All another read to why not to use Security Software on an Apple Device. Security Software just gets in the way, and this is a pure example of how and why. So, keep it off of your Apple devices.


How to Uninstall from and iPad:

Use the uninstaller to remove it from a computer, as just removing it from the trash would leave caches and shortcuts laying about your system files. As for a mobile device (ie this iPad), just hold you finger down on it in the Home Screen and remove it when it jiggles. Then, restart your iPad, having made a major change to your device. Know to always restart your device, after uninstall software and after installing updates so that all gets set to how it show be.

I have found a solution to the airprint. As it turns out, it was not IOS 17 it was Canon. I called Canon, they walked me through how to update the firmware ( 22.07) on my printer. Airprint is now working!😄

I had the same problem with Canon MF644 printer even with latest firmware. it turns out to be wi-fi security setting that "private Wi-Fi address" is enabled. After having it disabled my iOS 17.1 iphone is able to find Canon MF. Hope it helps.

I posted this in another thread and a few folk found it useful, I have copied it here


I had the same issue with an Kyocera laser printer, old but very quick duplex office printer, worked perfectly under iOS 16, would be recognised in the printer dialogue by iOS 17, but then quickly disappeared and would not print. Would not take a firmware update.

As I understand it, the older printers had an earlier version of AirPrint (Bonjour) 1.2.1 (2003 - 2015) which it seems is no longer supported by Apple Inc. The current version (?) is 3.1.0.1 dated April 2018 as far as I can tell. Printers which support AirPrint 3.1.0.1 should work. Unless a firmware upgrade to 3.1.0.1 works for your printer, iOS 17 won’t AirPrint to your device. Check with your printer help desk what version of AirPrint they support.

I got around this by configuring an AirPrint (Bonjour) print server running cups Bonjour print services, this is open source, from Apple, (cost me $50) which connects via USB to the printer, only pulls 5 volts and solved my printing problem without having to buy a new expensive laser. Hope this helps.

It’s not a matter of Apple not playing nice. Apple updated BonJour to fix a vulnerability, and printer manufacturers had to update their firmware to adapt; it’s the printer manufacturer who isn’t playing nice. If Apple hadn’t fixed BonJour your printer could have been hacked.


And note that most printers don’t have a problem; my HP, for example, was updated months before Apple fixed this problem.


Have you checked for a printer firmware update? You can usually do that from the printer’s control panel.

This issue has apparently been fixed silently in iOS 17.4. I’ve tested on multiple devices running both 17.4 and 17.4.1 and works with my old HP LaserJet PRO 200 M276nw which still has a firmware datecode of 20190401.

I recently updated to ios17 and the printer shows up as an available printer but shortly disappears after selecting it. I was advised to restart router, wifi extenders, printers and iPad. This didn't really make sense as my Mac mini and phone both printed ok. SO after a lot of water time I found this comment - spot on. I deleted the Norton app on the iPad and now everything woks properly. If you're running Norton I'd try this first. Once they update I'll reinstall on my iPad.

Same problem with my 2 iPhones and 2 iPads. Updated the firmware on my canon d570 and problem was solved. What. A pain and lot of time to figure out when the big companies don’t do their job correctly.

the variety of affected printer brands shows that the issue is not dedicated to one brand. It relates to the age of the printer sided Airprint implementation. If you can‘t use Airprint with iOS17 on your printer: watch out for a firmware update for your printer. Canon had a 2021 firmware update which i never applied With the firmware update i can use Airprint again with iOS17

We have a Canon MF110/910 and got the firmware update on the printer screen itself. Go to the Menu, then System Settings, then Update Firmware. Then select via internet to download the update over your WiFi directly into the printer.

I had the same problem on my iPhone and iPad after upgrading to iOS 17 and I even had it before the official release cause I’m a beta user. So I have a canon printer and someone wrote under here to upgrade the firmware on the printer and that solved the problem on both my iPad and iphone. So hopefully that will fix your problem. I spent over an hour on the phone with Apple support having me do like 15 things and nothing worked and they never told me to upgrade the firmware on the printer 🙄. Next time I’ll just search on here lol.

Found this suggestion about VPN software very helpful, had a similar problem Airprinting to my Brother printer from iPhone with IOS 17.0.2 Had Norton’s VPN installed switching it Off solved my problem.


Now having just upgraded to IOS 17.1 I could not connect to the internet at all, again this was caused by the VPN. Which I had reinstated (idiot that I am) so uninstalled it altogether and straight away I could connect.

The moral of this story don’t use a proprietary VPN or at least only in exceptional circumstances or so I was told by an Apple tech.

No doubt someone will say different.

If you have Norton for IOS, and have websafe on, this will cause AirPrint problem identified here. Also some apps will not function - the Marriott app Bonvoy will give you a MiTM (Man in The Middle error) and not load.

Delaware, first, see my post above, it is an iOS 17 issue, but only affects older printers.

Second check if your printer has up to date firmware, contact your printer help desk. If your printer only supports AirPrint (Bonjour) 1.2.1 (2003 - 2015) it won't ever print from IOS 17.

Apple are not supporting AirPrint (Bonjour) 1.2.1 any longer (as far as I can determine), therefore any printer with this firmware version will not AirPrint from iOS 17. Period.


Do the following, in this order:

  • If you have VPN installed, delete the VPN profile and app - If that doesn't fix it proceed with the next steps
  • power off the printer
  • Power off your iPhone
  • Restart your router by unplugging it for 15 seconds (many newer routers have no true power switch)
  • Turn on your iPhone
  • Connect the iPhone to the Wi-Fi network if it doesn’t automatically connect
  • Power on the printer and wait for it to connect to Wi-Fi


You should also check with the printer manufacturer for a software update for the printer.


These steps restart the BonJour network that supports AirPrint, and will usually resolve any AirPrint issues. You probably don’t need to do all of them, but following these steps is usually less work than finding the one that is causing the problem.

My printer is post 2018 and I had to update the firmware OTA in order to restore air printing on both my iPad and iPhone. MacBook was never affected. And until I updated the firmware, I would just air drop what I wanted to print to my MacBook. But like I said once I updated the firmware on my canon I just restarted the printer as a precaution and then I could resume air printing on my non MacBook devices. Also, the only additional advice I can give ppl is to ensure the printer and iPhone are on the same WiFi network. Like I can speak for myself and I have three - the main one, the 5G, and the network for my wifi extender. Sometimes it doesn’t matter, but usually when I make sure they are on then same one, I never have a problem.

Did you try the following, in this order:

  • If you have VPN installed, delete the VPN profile and app - If that doesn't fix it proceed with the next steps
  • power off the printer
  • Power off your iPhone
  • Restart your router by unplugging it for 15 seconds (many newer routers have no true power switch)
  • Turn on your iPhone
  • Connect the iPhone to the Wi-Fi network if it doesn’t automatically connect
  • Power on the printer and wait for it to connect to Wi-Fi


You should also check with the printer manufacturer for a software update for the printer.


These steps restart the BonJour network that supports AirPrint, and will usually resolve any AirPrint issues. You probably don’t need to do all of them, but following these steps is usually less work than finding the one that is causing the problem.

As you probably missed these troubleshooting steps when you read through the 15 pages of this thread before you posted, do the following, in this order:

  • If you have VPN installed, delete the VPN profile and app - If that doesn't fix it proceed with the next steps
  • power off the printer
  • Power off your iPhone
  • Restart your router by unplugging it for 15 seconds (many newer routers have no true power switch)
  • Turn on your iPhone
  • Connect the iPhone to the Wi-Fi network if it doesn’t automatically connect
  • Power on the printer and wait for it to connect to Wi-Fi


These steps restart the BonJour network that supports AirPrint, and will usually resolve any AirPrint issues. You probably don’t need to do all of them, but following these steps is usually less work than finding the one that is causing the problem.


If these steps don't work you should also check with the printer manufacturer for a firmware update for the printer. Apple has updated Bonjour to improve security, and the printer firmware may not be compatible with the latest Bonjour version until it is updated.

Two things to check:

  • Turning off VPN is not sufficient; you must actually delete the VPN profile if VPN is causing the problem
  • There is a firmware update for most Canon printers to make them compatible with the updated version of Bonjour. You should be able to update it directly from the printer.

Patrick, excellent post,

The issue is totally an iOS issue and incompatible older printers, you can still print to those older printers from laptops and desktops using IP address printing. (see internet instructions on how to install an IP address printer on your OS device). Apple have removed support for earlier implementations of AirPrint (bonjour). As I understand it, the older printers had an earlier version of AirPrint (Bonjour) 1.2.1 (2003 - 2015) which it seems is no longer supported by Apple. The current version (?) is 3.1.0.1 dated April 2018 as far as I can tell. Printers which support AirPrint (bonjour) 3.1.0.1 should work. My older printer would not update firmware, I can still IP print from MacBook (Sonoma) and Mac mini (Catalina) but I had to use another solution to print from my iPad and iPhone running iOS 17.

As iOS devices rely totally on AirPrint bonjour (you cannot IP print from them natively) you might be able to print using a print manufacture's iOS application, HP and Canon iOS applications will still print as I understand it as they implement a version of IP printing imbedded within the application. (can someone advise on this).

Try turning off the “Limit IP Address Tracking” Settings->WiFi-> the i symbol next to your WiFi and turn off this feature. This correction allowed my AirPrint to work normally. I also believe this feature is automatically enabled with each WiFi you connect to with the new update. Seems to all add up.

I wrote earlier that we couldn't reach our AirPrint printers (80+) via Printopia after iOS/iPadOS 17.0, now finally it works after updating the devices to 17.2. No need for us to update any firmware on the printers.

Thanks for these firmware update steps, FABERDP. I didn't know you could update the Canon MF240 series via the printer's keypad (I was making it more difficult than it was). So I went over to the printer, used the keystrokes you mentioned, and saw an option to update the firmware via the internet. Sure enough, the printer connected to the Canon site, found a new firmware update, installed it and now when I AirPrint, the printer STAYS CONNECTED and actually prints. Thank you, FABERDP, for putting just a couple of notes about how you updated the Firmware to enable the rest of to do this fast and easy fix. AIRPRINT IS WORKING AGAIN!


PS: I also learned in this research that while something is printing via AirPrint, you can open up your iPhone active app windows to see the printer dialog box to see the printing progress as well as DELETE THE PRINT JOB if you may have accidentally tried to print an entire users manual--which I may--or may not--have done.

I did manage to fix this on my phone by selecting the Wifi network ℹ️ > “Forget this network”


Then reconnect to the network and disable “Private Wifi Address”


Printing to my Brother Laser printer is working again. There was a recent firmware update to the printer prior to this but the firmware update alone did not resolve the issue.


I’m thinking it is a combination of the firmware update on the printer and the forgetting/reconnecting Wifi that resolved the issue for me. Hope this helps someone.


Have you checked EVERYTHING in this user tip, that was previously posted on the same page as your post?→AirPrint Troubleshooting - Apple Community


Especially removing VPN if you use it.


And note that most Canon printers need a firmware update to work with the latest version of Bon Jour. You can install it from the printer’s control panel.

Decided to try something else and changed the wireless security settings of my TP-LINK router back to WPA2(which what my old LINKSYS router was) from the WPA3 default settings of my new router, (reason I went for a new router a year ago was cause the newer WPA3).

 

And it all worked for almost a year happily together until Apple came out with IOS 17.

And now my old CANON MG6320 is printing again over AirPrint!!

 

Also is showing up in my router connection list and is still connected and able to print to after changing my router security settings back to the higher WPE3 security.

 

Fingers crossed it stays there longer than a day or so.....!

Thanks to a previous post. The AirPrint errors were traced to Norton 360 on my iPad. Removed Norton, problem fixed. Added Norton back, problem came back. Removed it’s fixed, so definitely a Norton issue.

Running iOS 17.0.3. Canon M240 appears when selected on my iPad and iPhone then disappears. Issued fixed after updating the firmware using the printer menu. Process took about 5 minutes.

I turned off the “Limit IP Address Tracking” in the WiFi settings for the network I am connected to and all works normal now. I believe this is an automatically enabled feature with the new iOS 17.

I had the same issue. Updated the printer firmware using the instructions from Canon's website. Issue resolved.

Thanks so much. Updating the firmware on my Canon MFP fixed AirPrint. Thanks for sharing this.

My HP printer was updated, but I still had problems. Norton was the issue. I didn't have to remove that app, but I did disconnect the Personal VPN and that solved my problem. I can now print from my iPhone with ios 17 to my HP printer.

If you have a web proxy this will also cause airprint issues - for some reason this only started with IOS 17. You will need to turn off the web proxy when you AirPrint. I have also had issues with some apps, that won’t function until I turn web proxy off.

patrickj86 wrote:

Also, just to clarify- I have a canon imageclass and I was able to update the firmware directly on the printer. I just googled the instructions and it walked me through regarding what settings to go to on the printer to update the firmware. Once it was done installing, I turned the printer off/on just so it would do a full restart and connect to my router and that’s when I was able to resume printing from both my iPhone and iPad.

Thanks, that was very helpful.

lmuniz73 wrote:

Same issue with Cannon printers on all devices after updating.

There have been reports that older Canon firmware is incompatible with iOS 17, but updating the printer firmware fixes the problem.

Ok, the main issue that has been proven to cause the issue is not being prioritized. Updating the firmware should be included before restarting the printer cause if you read through every single thread- it seems to be the problem caused by the iOS 17 update. Like I pointed out- Apple had me doing everything humanly possible for 2 hours before I thought to update the firmware on the printer which again, solved the problem instantly. And I even think I had already put back my VPN profile before updating the firmware (it wasn’t on though cause I knew that would cause an issue potentially)- so that’s totally unconfirmed if that’s contributing to the problem. I would say yes, potentially it could be a problem because of what a VPN actually does. But this solution is not working for ppl who have printers by all these random manufacturers that no one has heard of, just the mainstream ones. Canon has seemed to have received the message, so I’m surprised HP users are still having issues. They either have printers that are so outdated that there are no available firmware updates (which DOES happen unfortunately) but for the newer ones- maybe HP has yet to reconfigure their firmware so all their printers are compatible. I have no idea how Canon was able to come out with an update so fast. Guess I just got lucky.

100% UPDATE THE FIRMWARE ON THE PRINTER! Even the Canon reps did not know this, and sent me on a rigmarole for literally 5 hours, and they still had a terrible fix which was to download the canon print app, then you have to go save your item as a file (extra steps if it's an email or a photo) Thanks to YOUR COMMENT it works!


This was for my elderly parents who suddenly couldn't print after the iPad update and they have been suffering getting it to work. then I had to teach them how to use this canon print app work around - they were so confused - and I had to write down the instructions for them step by step, and still they had a hard time and were SO UPSET that it has become far more complicated.


I said don't worry mom, I'm sure they will have a fix soon because lots of people will complain, in fact, I will see how many complaints there are. Googled it, and found your comment - and your fix worked!


My mom is literally singing my praises for the last 15 minutes calling me a hero - but I did nothing. Thank God I found your comment! I so appreciate it, my parents are SO RELIEVED they can just go back to the original way and don't have to do this new complicated way!





I was seeing this with multiple devices after upgrading to iOS 17.x. Upgraded to 17.2 last week and it fixed all the Airprint issues I had. At the moment I'm installing 17.2.1 to test and make sure it still works.

00004000

Wao!!! Thanks Lawrence Finch! I just tried your recipe and it worked. I just printed the conversation with you from my iPhone on my HP 6200 printer! And my iPad has also recognised the printer. I switched off my iPhone, printer and the router. I started the router again after 15 seconds and then my iPhone and printer. Then it started working normally again! Thanks once again.!!

I was able to fix the problem by installing firmware update for my Canon printer. Just search your printer on the internet to find out how to do it for your particular printer. Hope it helps!

It appears that anyone using Norton VPN is having this problem and turning off vpn temporarily solves the issue

My cannon printer was doing this and after I updated the firmware, it fixed it. Go through your printer settings. Looking for update firmware.

I had to disable my VPN app on the iPhone to get AirPrint to work again after updating to iOS 17.

I spent hours with apple telling them it was their problem, but in the end it was Canon. They showed me how to upload a new firmware on my printer, problem solved.

IOS 17 with a Canon printer not selecting —the fix was to install a firmware upgrade on the printer. Thanks to the diggers that gave the solution.

I updated the firmware on my printer (Canon) and IT WORKED !!!!

Thank you Blah

Disabling VPN (Disconnect) worked for me.

If you have Norton websafe option turned on, turn it off - this resolved the AirPrint issues for me.

Thanks for the suggestion to update the firmware on my Canon printer. The update has been applied and my iPad is now able to print without issue. Thanks for the post.

I updated my canon 244 firmware and it solved the problem.

Ok. Lawrence. This worked well for two days and then stopped. I guess I need to try it again?? All software is up to date.

Well, it might be a bug in either the Photos app or the printer driver. I haven’t tried on my phone yet, but I will, and will report it via the Feedback app if I can replicate it. Did 17.2 fix it?

Do yo mean they were not heif before the upgrade. The printer printed them before the upgrade.

Great, glad it worked out.


Happy new Year!🥳

I hope it keeps working! Happy new year 🎉🎊

Photos won’t print on xerox either. Why is Apple so quiet about this. Not a very good Christmas present.

I updated Firmware on my Canon MF260 but still am unable to AirPrint. Any other suggestions?

I went through all the troubleshooting steps. Removed my VPN also. Still nothing

I updated firmware on my Canon MF260. Went through all the troubleshooting steps, etc. Removed my VPN. Still won’t print.

I totally removed the app, not the profile. However, when I reinstalled the app I had to set my profile up all over again

Thank you. Can print from my ipad again.

All day trying to figure out why I can no longer print from my iPhone to HP printer after installing ios17. What to do???

My Printer is not working after iOS 17.2.1 update,how will I solve it?

We have the same problem with our Canon MF244 printer. We spent two days resetting everything. Nothing works. We sure need our AirPrint function working again.

It all began after OS 17 update

Also have updated firmware on my Canon MG3220 but still no AirPrint capability…….

Sorry typo above is MG6320 printer

Yes and then some

I've just updated to 17.4.1 and it still doesn't see the printer... :-|

I thought it fixed the problem too but after a few prints, same old problem.

Thanks for the suggestion - still nothing...

What’s your printer? How is it connected to the network? Wirelessly?

Tell me , how can you call Canon?

phone number please

ios 17.4.1, Asus ax92u changed from wpa2/wpa3 to wpa2 but still cant find airprint. Samsung m238x.

Why does printer not work with software update to 17.5

Is this problem fixed

My Canon LBP612Cdw printer eventually showed up in the printer choices on my iPhone 15 Pro. However, although printing seems to work, all I get is a blank page regardless of what app I print from. Printing from my Mac works fine.

A firmware update didn’t help in my case.