Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

Can I install Snow Leopard on the new Mac Mini

I would like to upgrade from my Mac Mini 2009 (2.26 Ghz with Snow Leopard) to the new Mac Mini just released which will come with Lion. However, I would prefer to run Snow Leopard. Are there any ways to install Snow Leopard on the new machine?

250 replies

OK: Back from London! Having had some time to consider the problem, I have concluded that this bump in the road is not much different than previous bumps...


Then, as now, I have concluded that I must continue to move forward, and live with Lion, rather than crowbar Snow Leopard into my Mac Mini.


For example, I was disappointed to see when I opened my hard disk, that the amount of space remaining was no longer listed at the bottom of the window. But I have discovered that going to the VIEW menu and selecting SHOW STATUS BAR now restores that functionality. Again, as in the past, answers will appear to most of the slight glitches that Lion brings to the table.


So my only problem that remains is the Quicken problem: until Intuit comes up with a suitable Macintosh solution (unlikely given their Mac history), I need Rosetta capability. Hence: Virtualization and the wait until Apple authorizes Snow Leopard within a virtual machine.


But for those of us that do not want to wait, Ivan Drucker has documented two ways to get Snow Leopard to run under Parallels; I used the first method: http://www.ivanexpert.com/blog/2011/08/snow-leopard-as-a-parallelsvmwarevirtualb ox-guest-os/


I upgraded Parallels to version 7 (before I was aware that the article gets Snow Leopard to run under version 6). Some comments to Ivan article indicate they were unable to get his solution to work in version 7. However, I upgraded to Build 7.0 00001CE2 .14922; Revision 693916; September 13, 2011 of Parallels 7).


Then I upgraded my 2GB Mac Mini to 8GB (online for $87 including overnight shipping! As Bill Gates would say: "You can never have too much money or too much RAM!), and allocated 2GB to Parallels.


After a couple of initial glitches, it is working like a champ today (I have posted a couple of comments to Ivan's article which discusses my hiccups and their solutions).


User uploaded file

So until Apple unlocks Snow Leopard, here is a simple solution to my (and perhaps some others?) problems.

And a quick additional thank-you to MichaeLAX:


I just re-read your updated "summary" post at the MacRumors forum link (listed in your last posting two articles above this).


It's remarkable work: it's a classic in its clarity of expression and completeness (and your patience with occasional misguided, grumpy trolls). I know that other folks, not the least of them being newfoundglory, contributed essential pieces to the solution, but you did the hard work digging up and placing the vital extra pieces in the right order to unmix the puzzle and make that solution widely and easily accessible -- 00004000 and you had the clarity of vision that moved things inexorably forward until the whole view popped into focus and reality. Wow!


Whatever you do in "real life," if this is any guidance, my guess is that you do it VERY well!

I should have the right drivers, the MBP 13" has as close to the same hardware as the Mini 2.3 as any machine.



Here's an IORegistryExplorer view of the graphics:

User uploaded file

If I click on IGPU@2, then Reveal Extension in Finder, I get:

IOPCIFamily.kext

If I click on AppleIntelFramebuffer, then Reveal Extension in Finder, I get:

AppleIntelSNBGraphicsFB.kext


The same extensions are used on my MBP.

Apparently SL thinks the mini is connected to a TV:


User uploaded file


(The 2436 monitor is the one that I want to be 1920x1080.)


How do I choose a resolution that is not a "television" resolution? The Monitors prefs has only resolutions (no mention of "television"):


User uploaded file



Thanks, iX

Thaqnks David for the detailed and simplified proceedure for installation and everyone who has helped in making Snow Leopard installation possible!


I have followed your version 2 instructions and have run into a slight problem with my AirPort setup. After sucessful installation, tested with geekbench and scored 6600 in SL! But here is what my AirPort looks like:


User uploaded file


I can get it to work, but I have to open the Network preferences in the System Prefs. In there, it shows up as Ethernet 2. Because of this, every time I restart, I have to re-enter all my network settings. I have tried running applejackAUTO, and it showed

"AirPort: Link Down on en1. Reason 1 (Unspecified)" as well as a ton of permission corrections for AirPort Utility.


I Used my Nahalem Mac Pro to do the installation and I'm wondering if this is the cause of the problem, as it does not have an AirPort card installed. Any thoughts on how to fix this?

The Kernels of the Printers (HP+Lexmark) showed up at me too.

I just deleted them and everything was fine.


(I think the printers were installed by newfoundglory and so they come to the installer package, even if nobody else uses them)


User uploaded file

Great continuing work, newfoundglory! For those who still want Snow Leopard (and Rosetta) concurrently with Lion:


User uploaded file


I have now put full updated instructions for installing Snow Leopard (and Rosetta) into Parallels 7 in Lion, which now only requires the Snow Leopard Install DVD (and not the Server version):


http://forums.macrumors.com/showthread.php?t=1365439

In the 6th line down "- remove the wrong system-extensions" are you referring to theAppleIntelHDGraphics.kext and AppleIntelSNBGraphicsFB.kext ? If so, arent those taken care of if I use the NFG installer?

These kext came with the NFG-Package (with 150-250 others) - I think by mistake

User uploaded file

(a screenshot with Pacifist)


If you don't want to remove them,

there is just the popup if you do something with frameworks or the SystemPreferences

The System will work with or witout them.

There is still the ability to run Snow Leopard in virtualization in Mountain Lion.


Snow Leopard Server installs more easily, but is no longer sold by Apple; there are copies available on eBay; or


Install Snow Leopard client (with Rosetta) into Parallels


User uploaded file

[click on image to enlarge]


NOTE: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

VICTORY has been achieved in the Snow Leopard virtualization wars!!!


It has taken quite some time to get Apple to be reasonable about the virtualization of Snow Leopard (in spite of the fact that the Snow Leopard EULA does not prohibit its virtualization in Lion or Mt. Lion on a Mac).

I believe that my efforts to help everyday users be able to virtualize Snow Leopard client in Parallels (and others who extended this information to VMWare Fusion) finally convinced Apple to let down the barriers, and they chose to do so with this 95% reduction in price of Snow Leopard Server:


User uploaded file

[click on image to enlarge]

My next project will be to develop instructions on how to "remove" the Server functions of Snow Leopard Server, so that it will be able to operate without the overhead needed by the "server" functionality and "look and feel" just like Snow Leopard client. I am waiting for my copy of SLS to arrive this week. 😎

WZZZ wrote:


As far as I can tell, no one ever discussed the possibility of getting there by restoring a 10.6.8 clone, and if one of those guys is still around, that's my question.


Yes, you can restore a 10.6.8 clone to the 2011 Mac Mini and it will boot and work.


To get the 2011 Mac Mini to its full speed, efficiency and utilization of such new technologies as Thunderbolt, you have to install the extra software suggested by newfoundglory:


You can read more about these software additions by googling the term: "NFG gnommak Edition Mac mini 2011"


I just did it, but rather than use a clone, I did it the hard way, but a clone would have worked just as well. I used the instructions offered in the link at the bottom of this post:


1. I added a "Snow Leopard" partition to my 2011 Mac Mini internal HD


2. I booted it into Target Mode by holding down the "T" key during reboot.


3. I connected my 2011 Mac Mini in Target Mode by Firewire to my 2007 Mac Mini and installed Snow Leopard 10.6.3 on the Snow Leopard partition on the 2011 Mac Mini.


4. I used the 10.6.3 folder to restart the 2007 Mac Mini and then used Software Update twice to upgrade all of the elements of Snow Leopard.


5. I shut down both computers, disconnected Firewire and rebooted the 2011 Mac Mini into Snow Leopard and it booted and operated.


6. I then installed all of the newfoundglory additions using the NFG installer and rebooted.


7. One commentator indicated that to get an external DVD player to properly function in Snow Leopard on the 2011 Mac Mini to make this change:


Following Software Update’s final run of updates, I started working with the Mini and everything looked like it was working, including the all-important Front Row. Front Row was able to communicate with iTunes 11.x, so it looked like I was set until I attached an Apple USB SuperDrive and tried to play a movie DVD. No go; neither Front Row nor Apple’s DVD Player application recognized it as a valid DVD drive.

Why was this? After all, the 2011 Mini never came with an internal DVD player. This should have worked; except for the fact that the 2011 Mini was never supposed to run 10.6.8 either. All of the 2011 Macs that ran 10.6.8 were laptops that came with internal optical drives.

What fixed it was some additional driver modification. Using information found here on MacOSXHints, I edited/System/Library/Frameworks/DVDPlayback.framework/Versions/A/DVDPlayback with the 0xED hex editor. What I was doing was updating DVDPlayback‘s definition of an acceptable DVD player by finding the word Internal and replacing it with External, by searching for (hex)496E7465726E616C and replacing with (hex) 45787465726E616C.


https://derflounder.wordpress.com/2013/01/11/installing-10-6-8-on-a-2011-mac-min i/


User uploaded file

[click on image to enlarge]

William,


I bought a MM for my partner. He is very visual in his organization. He groups related items together in a folder in icon view. Lion has been rearranging these with a random consistency. We have done lots of suggestions and the problem persists. It is a bug. Here's the thread: https://discussions.apple.com/thread/3216766


We downgraded so that his workflow is not impacted by the operating system.


Rob

Thanks for some great info, and we might want to stick a little more tightly on the core issue on this thread -- getting Snow Leopard up and running at something approaching full speeds on the Mac Mini 2011. Please don't stray too far afield in this thread; perhaps consider starting another one on the "Mini 2011 as Home Theater" or something more appropriate (there are some extensive threads already running on that here in Support Community Discussions). Thanks! And your topic is very interesting, so stay close by here.


There's a reason to keep it focused! -- as of this morning, this thread is now very close to 10,000 views! -- presumably, mostly by people looking for a way to get SL up and running on their 2011 Mini. We want to keep progress moving and "buzz" generated on that topic if we hope to get a good coder to come up with some solutions. There IS a solution somewhere out there, waiting for someone to write it.


Incidentally, for those of you looking to get max graphics and video production heft out of your Mini, there's an active Support Discussions thread here at

https://discussions.apple.com/thread/3213645?answerId=15896182022#15896182022


Yes we can can! 😁 FREE THE SNOW LEOPARD 10,000 ! etc etc etc.

Michael,


That's an easy answer. Lion needs a bug fix; it keeps rearranging the icons within a folder. My partner is extremely visual and organizes his work by grouping related icons into a cluster. Lion will rearrange the icons into an alphabetical grid at near random intervals. Now, I know this is not a major bug for everyone, but to my partner it is. He cannot use Lion because his workflow is severely crippled.


Now when Apple fixes the bug, we will migrate over to Lion.


Here are the threads relating to it:


https://discussions.apple.com/thread/3216766?answerId=16075933022#16075933022

https://discussions.apple.com/thread/3241846?answerId=16132633022#16132633022

Like many others I have managed to install SL on the new mac mini server (2.0Ghz i7 quad).

Geek bench score with the single 5,3 kext added is >8000, but unfortunately I have major display issues.

I used a 2008 MBPro (2.4 Ghz C2D running 10.5.8) to install SL retail DVD 10.6.3 onto the MacMini server SSD in target disk mode (I first partitioned the SSD using disk utility within Lion).

I copied the 5,3 kext from Lion to SL, and applied the terminal commands (no extra chmod was needed).

Then installed the 10.6.8v1.1 combo updater ontop of the SL partition (still from the MBPro via target disk).


I am trying to run the Dell U2711 at 2560x1440. I don't currently have the correct mDP>DP connector, but am not convinced it will help. Now when booted in Lion, the mDP to DVI works (1920x1080 max resolution), as does the HDMI>DVI at same resolution.


But under SL, only the HDMI port is working, and I have the ghost monitor (and pointer glitches) so many others have reported.

At one point I did manage to get an image from the mDP>VGA on the Dell at an odd res (something like 2048x1134), but after fiddling with the various adapters and the display arrangement, I now appear to have killed it completely: All I can see on the Dell monitor is the "ghost screen" with nothing on it but a desktop bacground.


I am at home now and have done some Google research. Apparently Command + F1 will force display mirroring. I hope this w 00001D24 ill then make the SL partition display correctly to the Dell monitor.


Anyway. It seems that my SL install lacks correct drivers for DP output.


Now some questions: Only Colacin talks about the TB/DP driving the Dell U2711 correctly. That machine is a Dual core i5 (I presume also with the Intel HD3000). So the difference is one of hardware and also of kext.


NewFoundGlory got the server to work fine (but used a SL image from a 2011 MBPro).


Woudl it possibly help if I copied the 5,1 kext across instead of the 5,3 kext?


What if I were to plug the Dell Monitor into the DP during the SL install? Could that make a difference in helping it be detected?


Finally, could this thunderbolt update help?

http://support.apple.com/kb/DL1476

Hi Vincent. According to the apple site the are two i5 minis (http://www.apple.com/macmini/specs.html).


The base 2.3 has the HD3000, the 2.5 has the ATI card. Can I confirm that the working TB port you have is the 2.5?


It is not clear whst Colacin's i5 is, but given these results I suspect it is the 2.5 i5 too.


That points to the missing driver being the one for the HD3000 which in newfoundglory's method is addedd correctly, but not in the method myself and others have used.


I wonder if others can chime in: Has everyone with display anomolies got a 00004000 mini with the HD3000? i.e. either the server model or the 2.3 i5.

Question for Newfoundglory: Does the DP output work on your mini server? (i thought I read one of your posts where you reported that it does). For Vincent (above) even doing an install from a 2011 MBPro did not enable the DP to work for the mini server model.


I wonder: With your MBPro, did you incrementally update to 10.6.7 using the MBPro-specific release of 10.6.7? I was searching recently and saw that there was a general 10.6.7 release and two "model-specific" releases - for the early 2011 MBPro and the early 2011 iMac (both of these are Sandy Bridge computers with Thunderbolt).


http://support.apple.com/kb/DL1368

http://support.apple.com/kb/dl1383


I had an idea that if I could install the 10.6.7 MBPro update onto the mini server it might contain the necessary DP drivers (that you may have). Of course it failed because my host machine for the Target disk mode is a 2008 MBPro and the installer refuses to run the model-specific 10.6.7 update (even when targetting the mini server's hard-drive via target disk mode).


Interestingly enough, the 10.6.7 general update is not sufficient to boot the mini server (even though the MBPro-specific 10.6.7 can run a very similar set of hardware). Does this suggest that the MBPro 10.6.7 release is substantially different from the general 10.6.7 release?

Ok, I got this tip <a href="http://hints.macworld.com/article.php?story=20111107064435227">here</a>. The article is about editing the drivers with hex fiend, but that did not work for me. In the comments below the story is this little gem about editing a plist file to get the drive to work (by the way the file com.apple.Boot.plist exists in /Library/Preferences/SystemConfiguration, if you don't have it on your snow leopard boot partition you can just create it, but it was there for me):


here's a much easier way to do this without hacking OS files. This works for me on Lion and Snow Leopard, I haven't tested older OSes.


The trick is to add "mbasd=1" to the Kernel Flags in com.apple.Boot.plist. com.apple.Boot.plist exists by default in Lion, but not in earlier OSes.


There are multiple ways to edit a plist, I'll use TextEdit since every user has it. Since Lion already has com.apple.Boot.plist there are two subsets of instructions, one for Lion and one for all other OS Xes.


Bottom line: com.apple.Boot.plist will look the text between the starred lines when done:


*****************************************

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Kernel Flags</key>

<string>mbasd=1</string>

</dict>

</plist>

*****************************************

Dear Rossfuru.


You are nearly there, BUT the standard 10.6.8 installation lacks drivers for a number of things. The most obvious (that you have found) is for the Thunderbolt/DisplayPort ouptut. If you connect the Mini via the HDMI socket (HDMI>HDMI or HDMI>DVI), I think you will find that you can get a useable display output.


However, you will still lack correct driver support (you will likely experience a second ghost display and random pointer issues). In addition the correct preference files for the Mac mini 2011 need to be instlaled to get full performance from the i5/i7 chipset.


Please refer to the detailed instructions linked further up to add the necessary modified kexts. I'll add the link here:


https://discussions.apple.com/thread/3209335?answerId=17429168022#17429168022


David carefully and accurately explains everything necessary to get it to work.

rossfuru wrote:


after a very late night of trying to downgrade to SL on a 2011 2.3 mini, i gave up, defeated.


I followed the directions to the T, twice. even delta upgraded to 10.6.8, but when I plugged in the mini to my Viewsonic 24" led via TB/DVI adapter, I got a white screen, apple, then blank.


I had to go back to Lion last night/this am because the machine needs to be in use.


the mini worked fine when targeted to a Imac core 2 duo, but on it's own failed to muster the will to work.


has anyone else run into this?


here's what i did.


1. targeted the mini to the imac

2. booted the imac to a SN 10.6.3 retail

3. Disc utlitied the mini to a new GUID partition

4. Installed SN to mini

5. when restarted, installed the 10.6.8 combo.

6. tried to boot up to TB/DVI on the viewsonic, white screen, then no signal.


weird.

Why did you personally have to do all of this: "(I had to remove 16 .kext-files afterwards: BJUS...kext, 14x HP...kext, Lexmark...kext)" ?


I got popups, that these system-extensions are not usable:

see: https://discussions.apple.com/thread/3209335?start=446

and below


After 6 month with Leopard on my MacMini I build in a SSD in the mini (three weeks ago) and made exactly these things:
- start the Mini in FireWire-Target Modus

- install SL from an other Mac on the empty SSD

- migrate the user and applications

- install ComboUpdate 10.6.8 from an other Mac

- reboot the Mini and install NFG-package

- remove the wrong system-extensions

- reinstall the ComboUpdate

- repair permissions


Geekbench: 32bit ~ 7000 and 64bit ~ 7600

System boots in12 seconds

DeepSleep works well (eight seconds after booting)


With this System you should be able to boot every 1-4 year old Mac

(In Firewire-Target-Modus or with a clone on an external drive)


Beside:

I made a test with SnowLeo and MountainLion (with "real" drivers for the Mini) on my MacMini:

Handbrake 0.96 > Apple TV: Mountain Lion is 5% faster

Artlantis 4.1 > Rendering: Mountain Lion is 10% faster

Cinebench 11.5: Mountain Lion is 7% better


but Geekbench is 5% faster with SnowLeo!


MountainLion has some improvements (i.e. you can use "save as" in Textedit or Preview again!)

But of course MountainLion doesn't support Rosetta.

And some other little points are missing, which I easily can use with SnowLeo.


I will use SnowLeo as my main System.

Hi mesa3077boogi,

Are you only getting popups because you are using the i7 dual core Mini and the NFG package was i7 quad core specific?

no, these kext are for a Lexmark printer and a HP-Printer that I don't have.

Even "josefromaldea del fresno"got these popups: https://discussions.apple.com/thread/3209335?start=474

that you used your time machine to copy over different versions of extensions

I just posted something old, because you asked what's about the kexts.

I didn't change any kext know, because everything works fine now.


By "repair permissions", do you mean boot from the Mini running 10.6.8 and open disc utility, select the drive or partition that SL 10.6.8 is installed on and simply click "repair permissions".

That's it


Question: ...

I said in my post above:

"With this System you should be able to boot every 1-4 year old Mac

(In Firewire-Target-Modus or with a clone on an external drive)"


Maybe someone will add .kexts for newer hardware, but at the moment this seems to be the "newest" System 10.6 which is possible.


I did perform these steps three weeks ago, because I wanted a clean System on my SSD,

but I could have used a clone.

Scott Bennett wrote:


I returned the unit yesterday. Here is the information that is on the receipt: Mac mini/2GB RAM/ 500GB HD/Airport/Bluetooth SC07GKA2HDJD0. I'm not sure if there are zeros or O's in the serial number. The characters look almost identical in the receipt. I wish the US would adopt the slash zero character.


Apple registration numbers and Apple hardware product serial numbers may sometimes contain the number "0" (zero), but not the letter "O"

Wondering if any of the heavy hitters in this thread know if it's possible to simply add a partition to a 2011 Mini and restore a Snow Leopard (10.6.8) CCC clone from my Late '09 iMac, and then move over that package of kexts (found here)?

https://discussions.apple.com/thread/3209335?answerId=17429162022#17429162022


http://lowendmac.com/2013/best-macs-for-running-both-snow-leopard-and-mavericks/


Would still very much appreciate hearing from any of the main contributors to this thread about just restoring a clone of 10.6.8 to a Mini partition and then moving over the kexts package, as linked above, and per the lowendmac article.

Since there has been an irrelevant and unnecessary post bringing this discussion to new page, where my original question may not be seen, I am re-posting that question.


Wondering if any of the heavy hitters in this thread know if it's possible to simply add a partition to a 2011 Mini and restore a Snow Leopard (10.6.8) CCC clone from my Late '09 iMac, and then move over that package of kexts (found here)?

I've seen the posts you mention from NFG plus quite a few others in this very long thread and elsewhere, but what I'm asking is if it's possible to simply restore a 10.6.8 clone (which I have from a Late '09 iMac) to a second partition on the Mini 2011, plus add the needed kexts, instead of installing through Firewire TDM from a 2011 MBP, which has purportedly the same basic hardware configuration, or by way of a "vanilla" image with InstalDMG, which may also do the job.


As far as I can tell, no one ever discussed the possibility of getting there by restoring a 10.6.8 clone, and if one of those guys is still around, that's my question.

I mentioned before about parallels server for the mac mini -- we demo'd parallels server (on a mac pro) earlier in the summer, and were very impressed with how it just worked.


If you have a 2011 mac mini and any mac running Snow Leopard Server (not client) then you could contact Parallels and ask them for a demo for parallels server for the mac mini.

  • Take your 2011 mini back to Lion.
  • Install the free demo of Parallels Server on the mini
  • install Snow Leopard Server on a virtual machine inside of Parallels Server, using your existing Snow Leopard Server machine.
  • Report back to us if it works!


(Note for migrating from an actual to virtual machine -- we installed mac os x server on the virtual machine, then booted the existing server into target disk mode and used SetupAssistant to transfer it over. They have a procedure using a TimeMachine backup, but it didn't transfer over a bunch of stuff.)


(Further note -- Snow Leopard Server costs $500, and Parallels Server for the mini costs $200, so this is not a cheap solution if you otherwise have no use for these things.)

Ok, I think the answer is here, but I've sort of lost the thread. For the mac mini buyer who MUST run Snow Leopard now, but will eventually upgrade to Lion, I see two choices --


  • buy a 2010 mini from somebody who still has one around, or ebay, etc., upgrade it to Lion when ready
  • buy a 2011 mini, downgrade it to SL now, upgrade it to Lion later


Clearly, once you get to Lion, you want the newer, faster 2011 machine. So the question is this -- what is the speed of a 2011 mini running SL vs a 2010 mini running SL? We already know that the 2011 running SL is a lot slower than the same machine running Lion, but that's not the choice.


So is the 2011-hacked-to-SL slower than the 2010-running-SL, and if yes, how much slower?


The 2010 mini is NOT cheap -- $849 from amazon -- so the question is how big a hit is the downgrade on the 2011 compared to the 2010?

Hello newfoundglory,


first I want to thank you for your effort to help us (your hopeful followers:-).

As I took similar steps (even in your footprints) I know it was a lot of work.


So I feel a little bit guilty asking you for some more help.


In fact it is more unix than mac. (Unfortunately that has become the same now).


Then I tried to fix permissions etc. with your recommendation:

"Using Terminal and Snow Leopard partition:

sudo su -

[enter your admin password]

cd /Sy*/Li*/Ex*/IOPla*/Con*/Pl*/AC*/Con*/Res*/

chown root:wheel Macmini5*


FINALLY, update the kernel caches using Terminal by typing:

kextcache -system-prelinked-kernel

kextcache -system-caches"


But I had no success.

There are several messages in terminal, but no very specific ones


Then I tried with with David Amis method (you surely know it from the threat):

"

  • 7. Open the Terminal app in the utilities folder, and type the following:
    sudo su -

  • It will then ask for your password.
    8. Paste the following into terminal:
    cd /System/Library/Extensions/IOPlatformPluginFamily.kext/Contents/PlugIns/ACPI_SM C_PlatformPlugin.kext/Contents/Resources
  • chown root:wheel Macmini5*
  • chmod 644 Macmini5*
  • cd /System/Library/Extensions
  • chown -R root:wheel AppleIntelHDGraphics.kext
  • chown -R root:wheel AppleIntelSNBGraphicsFB.kext
  • chmod -R 755 AppleIntelHDGraphics.kext
  • chmod -R 755 AppleIntelSNBGraphicsFB.kext
  • kextcache -system-prelinked-kernel
  • kextcache -system-caches
  • exit


echo 'Finished'"


But that too didn't succeed.


So I ask myself (and you):

Do I have to change anything in that commands, when I have (of course) another machine/Mini?


Probably you'll laugh, but I didn't find the answers for my unix-stupidity on the web.


Till now, my Mini (Core i7, not the server) did realize about 5.600 geekbench. And I'd like to become 00004000 a little faster with it.


Thanks in advance.

Sadly I can confirm Michael Wasley's claims here. I tried several ways of getting SL on my brand new 2011 Mac Mini and every one of the resulted in a kernel panic.


Personally I'd wait until Lion has some time to mature. My experience with it so far has been abysmal.

After struggling for several hours last night I'm still stuck with Lion. :/


I tried target disk mode a few different ways and every time results in a kernel panic. There's something going on with the hardware that refuses to be downgraded.


At this point my only recommendation is to hold off on the new Mini until an update is released for Lion. I know that a few people are reporting that their experience has been positive, but for every one of them there are dozens experiencing problems. I have had to hard reboot this Mini ~50 times in less than a week. I've even gone as far as having Apple replace the hardware and I'm still seeing the same issues.


As always YMMV.

For those desperate to try this, the answer is simple: any existing / older operating system release simply does not have the proper drivers to support the new hardware (motherboard, chipset, cpu, ...) It will panic.


This is even the case with mid-cycle releases; where new notebooks & desktops were released with for instance 10.3.5 - 10.4.7 - 10.6.5 (numbers just as an example). If on those systems you need to do a clean install, don't have the factory discs that came with the unit and think you can just use the previous OS or the official upgrade disk to 10.3 10.4 10.5 or 10.6 respectively ... and then update back to 10.x.x ... you cannot. The earliest OS that works on any mac is that which it was released with.


There are instances where one can cross-boot so to speak with another drive from a similar generation ( PPC or Intel ) machine with the same OS version. But that is different than installing the previous OS.

Not to be that guy, but you're wrong.


The latest hardware CAN run previous versions of OS X under a very specific set of circumstances (like what we have here). If a new MBP is announced mid-cycle you're right, it cannot run a lower version than it was released with.


However in the case of the upgraded hardware that coincides with a new OS release (not an upgrade to existing) it's more complicated. Snow Leopard 10.6.8 can run successfully on the new MBP/Mac Minis. I know this because I can put my MBP (10.6.8) into Target Disk Mode, connect it to the Mini and then boot that drive on the Mini. So 10.6.8 is running on the Mini's hardware without kernel panic.


The issue that is left unresolved then is getting 10.6.8 onto the Mini. You cannot use the Retail SL installer because at best it's at 10.6.3 which, as you've pointed out, lacks the drivers to handle the latest hardware. I was hoping that I would be able to install SL onto the Mini running in Target Disk Mode without issue, then immediately run the Combo Update for 10.6.8. That should work in theory, but unfortunately doesn't in practice.


So I'm left with one final option which is to pull the hard drive entirely and swap it with another 2.5" SATA drive which does have SL 10.6.8 successfully installed on it. My biggest problem there is that I've only had this thing for 6 days at this point and swapping the drive out this soon isn't really something I'm looking forward to.

SUCCESS!!!


After 6 days and NUMEROUS attempts I have figured out how to get Snow Leopard onto the new Mac Mini!! It turns out I wasn't thinking the problem all the way through. I thought that the Mini was causing the kernel panic when connected in Target Disk Mode. However I was trying to install the retail Snow Leopard (which is 10.6.0) onto the Mini using an MBP which required 10.6.3!


There is a step after all of the applicable files are copied to the Mini (TDM) where the Source machine reboots and is supposed to continue the install. This is where my MBP was freezing up and I couldn't understand why. Well it turns out that the MBP is attempting to boot from the SL disk (10.6.0), however this machine requires a minimum of OS X 10.6.3 so the boot was hanging.


I ejected the retail version of OS X, input the Recovery disk I got with the MBP (which is 10.6.3) and the install continued as usual. Once installed I booted directly to the Mini's hard drive (TDM) via the MBP and ran Software Update to get to 10.6.8. Then rebooted and let the Mini boot itself...and we're up!


Steps:

1) Put Mini in Target Disk Mode (Firewire only)

2) Put SL retail install disk into Host Mac and install to the TDM drive

3) When the reboot hangs power the machine down (or if you're fast hold down Option on that reboot) and restart holding Option.

4) When the boot choice screen appears eject the Retail disk and input your Recovery disk.

5) Boot to the Recovery disk and the install picks up automatically (don't worry, it's actually installing 10.6.0 even though you're booted into 10.6.3's recovery).

6) Once you've gone through the new user introduction stuff (input username, etc) run Software Update

7) Power down the Mini and restart it w/o TDM.

8) Profit

Bravo! Bravissimo!


Now -- can we hide this whole thread about your finding an answer? Just joking, Apple -- I've had Macs since 1986, and I know that you'd never put your customers in a bind like that!...


This makes the 2011 Mac Mini so very, very, very much more useful to me and to so many others! Just read the online whine in so many forums! As soon as I can confirm that we don't lose some drivers for the AMD Radeon GPU, I'm onboard with an immediate order for eight 2011 Minis with i7 duos and the Radeon HD 6630M. Happy face!


Quite a few of us need some of the capabilities of Snow Leopard that are (for right now, anyway) lost in Lion. Soon, soon, we can no doubt upgrade to Lion as the gaps are filled, but for now -- nice machine, elegant Lion, imperfect combo for lots of real-world work. For now.


Anyway, great work, John! A primer in how not to give up, but keep poking 'til you get it right. I've been following your thinking (and that of others) who reasoned that very similar hardware might be able to run the same OS, regardless of box. QED!!! Yea!

John, I have already posted on various forums (and in another thread, here!) regarding your solution.


If you happen to drive by your favorite church and you hear the "Hallelujah" chorus drifting our their doors -- maybe they're ordering Minis! Again, GREAT WORK! -- and Apple will sell some additional units, probably a bunch of 'em, because of your persistence and cleverness in adding utility (and value), Apple's plans notwithstanding.


😁

In technical terms, Wahooooo!

I got it to boot and run 10.6.8 but it is running really poorly.

My method did not go all the way back to 10.6. I used a 2009 mac mini with a clean 10.6 install then upgraded to 10.6.8 runs badly slow and hang ups.


your way seems to be a cleaner run.

I wonder if there are some specific pieces (drivers, etc) for that 2009 Mini that cause conflicts in the new hardware?


My suggestion would be to download Carbon Copy Cloner (it's free) and make a full clone of your machine as it is. Then I'd wipe it and try my route to get 10.6.8 on there. If it's faster and more reliable then problem solved. And if not you could always restore your CCC backup and have lost nothing.


For what it's worth my Mini w/ SL is running flawlessly. In fact this same Mini w/ Lion caused my 24" Cinema Display to freak out (constant flickering, image split vertically, etc) and yet now that I'm on SL it's perfect again (I'm using it right now to type this 🙂 ). I haven't installed Plex yet or gotten my media setup in iTunes, but I suspect everything will go smoothly. If not I'll report back for sure.

Will this only work using the combination of a retail SL disc and a recovery disc from a MBP? I have a retail SL disc but no access to a MBP. Could I do this using a late 2009 iMac as the source instead? The iMacs recovery disc is os 10.6.2 I believe.

No to using your 2009 iMac recovery disk as part of the 2011 Mini move to Snow Leopard, It won't drive the 2011 components.


The boot disk must be able to activate all of the new hardware, including CPU, GPU and Thunderbolt, that are included in the 2011 Mini. That's why the process works: it relies on the recovery disk rebooting the 2011 Macbook Pro, and thus being able to boot the very similar setup in the 2011 Mini and to fully activate its imporant components..


Items that need drivers not available in your 10.6.2 disk include the Intel i5/i7 CPU's, the Intel or Radeon graphics processors, Thunderbolt chipsets, etc. Someone will be able to create (and will do so. soon) a boot disk image with modifications that will help you get the job done without a MBP, and word will circulate on that.


You may be stuck with 10.6.8 pretty much forever, if Apple decides to detect and disable booting for the 2011 Mini in future 10.6.x updates. Let's hope that they value our needs and don't do that.


However, being "stuck" with 10.6.8, isn't really a bad fate: the re-released, revised version of 10.6.8 is strong, stable, full of drivers and hooks for recent hardware, and fast; it should serve us very well for many years. Until we someday update to.... (ohmigosh!)

...Lion.

😮

If I'm understanding what you have available to you, yes it will work.


You have an iMac (running SL), the iMac recovery d 00004000 isk (which you think is 10.6.2), and a Retail OS X disk.


If that's correct then yes you can do it. My instructions reference an MBP because that's what I have, but it's certainly not a requirement.


The requirement is that you install the Retail copy of SL onto the Mini which is connected via Target Disk Mode. When your iMac reboots (which it will) you'll have to hold down the Option key right after the OS X Chime (before the screen turns white/gray). From the boot menu you can hold down Eject and remove the Retail copy. Insert your iMac recovery OS X disk and continue as usual.


Good luck!

Thanks for the info John and Steve. Seems to be conflicting opinions though as to weather it willl work with my setup (yes my iMac has the first gen i7 processor - late 2009?).


I do wonder that since my iMac restore CD wont have AMD/Intel HD3000 display drivers nor Thunderbolt support if this in fact would work? Unless those components will come into play when I apply the combo update via the Macs software update?

Right, I think because your initial post was a little confusing you inadvertently led Steve astray. No big deal...I'm right. 😉


Your iMac restore CD simply needs to boot your iMac, it has NOTHING to do w/ your Mini. Your Mini HDD is going to boot via your iMac (so you will be viewing your new Mini's OS X install through the iMac) as soon as OS X is installed. Because of that we know the hardware drivers will be present to run the iMac, which will allow you to view the Desktop and run Software Update to obtain 10.6.8.


10.6.8 has all of the drivers you're looking for (Thunderbolt, Intel HD 3000, etc) so once the update is complete on the Mini and it restarts just shut it down, connect it to its own monitor and away you go!

Fortunately we are in agreement on everything 🙂 apart from cross booting similar hardware with an older OS that predates the new system. I admit defeat there.


I admire your perseverance and congratulate you on pushing through the hole and getting a successful installation.


I guess it hinges on existing core hardware support in Snow Leopard for various systems, Lion being a software revision of Snow Leopard and the mini being the last one to get the core upgrade with I guess the same hardware parts?


I'm still kind of amazed at the method - which is not without hiccups and a custom install DVD would be handy - and that Lion is actually not required.

This might be unique in history ... and an interesting precedent 😉

Well I'm glad we can maintain our friendship throughout this ordeal! 🙂


In previous releases (probably starting at Leopard) I would have agreed with you wholeheartedly that you cannot run new hardware on the previous full-release software. However it seems like with Snow Leopard Apple has gone to a more iterative approach where they aren't doing a complete t 00004000 ear-down re-write of the next generation OS. As a result there seems to be some edge cases like this one where we are able to get the previous OS onto new hardware.


Or that could all be non-sense and the reason the new Mini can go backwards to SL is because Apple recognized that many people still need Rosetta and they felt extra compassionate that day. 😉 I think dropping Rosetta is a pretty big deal and Apple knows that. As a result they made sure that the 10.6.8 update included the necessary drivers to keep the new 10.7 machines running for the short term.


To be honest my perseverance is partly due to finding some references to Thunderbolt in the System Profiler. It occured to me that the new iMacs with Thunderbolt were released BEFORE 10.7 went live. And as a result their hardware needed to be supported by SL (I think that was probably 10.6.7 but I'm guessing). This was just the glimmer of hope I needed! 🙂


As an aside for those who are interested. My Mac Mini has the upgraded video card in it (AMD Radeon HD 6630M) and video appears to be working as expected. I have not plugged it into my HDTV to try out movies yet (still importing my media collection into iTunes, it takes awhile) but I'm confident that will go smoothly. For those of you with the Intel HD 3000 you should be fine since that video card has been in several different Macs recently so it's fully supported by SL.

Thanks for your work on this John, looks like I'll be able to order new minis after all--I was thinking I'd have to order last year's model.


Since you could boot the mini from a MBP 10.6.8 in target drive mode, could you put both the mini and the MBP in target drive mode, and use a third machine to clone the MBP's drive to the mini? Seems to me the cloning should have the same result as a drive swap, but maybe I'm missing something.

Not quite...the install on your MBP is specific to the MBP hardware which the Mini doesn't share. The Mini's hardware (think WiFi card, Bluetooth, etc) is going to be different than the MBP's hardware. :\ This is why I had to use the Retail disk to install OS X on the Mini.


However if I hadn't tried as many things to get his working as I did I wouldn't have found a solution. It's certainly worth a try! 🙂 My suggestion would be to use Carbon Copy Cloner (or SuperDuper) installed on the 3rd machine. Worst case you've wasted a half hour! All said and done I've got probably 25-30hrs into all of the various methods I tried to get this working. To be fair...most of that is waiting for processes like OS X installing lol but a LOT of it was filled with swearing and pulling at my hair! 😉

Well, it is all too easy to get hung up on a right/wrong thing.


This is a most interesting case ... and am still surprised it actually worked. Especially point 3-4-5. I don't fiddle with Mac hardware & software enough; but have done more than a fair share over the past decade. To some extent I am not surprised as SL already supported various latest generation components in the other systems ... that still leaves the motherboard and the machine identifier check.


The OS has been pretty much always been software development, I think (apart from PPC/Intel). Now and then there are point releases in the OS to support new Mac hardware, iTunes releases to support new iOS devices, etc.


I agree that dropping Rosetta is a very big deal. I have advised several people explicitly not to update nor upgrade to a new system; because they need Rosetta for their software. A hardware failure for these people would be problematic because they depend on running their apps until they are updated, if ever, or a compatible application would come out that allows importing & conversion. People buy expensive software packages and have a far greater investment in them as far as time & data; then the hardware it runs on.

PS: Just read something about the new MacBook Air runing on a newer / custom Lion build and the common Lion installer doesn't even work; which would boil down to 10.7.1 or .2 being required. I guess they won't be installing Snow Leopard.

I noticed that the discussion seems to focus on getting Snow Leopard onto an internal drive of the new Mac Minis. I currently boot my 2009 Mac Mini from a FW800 external drive with 10.6.8. If I just plug my external drive into a new 2011 Mac Mini, will it boot into Snow Leopard if I set it as the startup disk?

I'd say your chances are better than 80%. The only thing that could hold you up would be if your 2009 Mini's install didn't include all drivers that are possible for Mac Minis to need. So your external drive only has the 2009 drivers and not any other drivers. In that case you might be in for some issues surrounding Bluetooth, WiFI, Video, etc.


Best part is you can try it w/o hurting/installing/changing anything 🙂

Now that doesn't surprise me at all. Apple's been treating the Air like a treasured pet ever since its announcement several years ago. Between the soldered in RAM and proprietary everything that machine is a PITA to work on...

Quick question John (or all). I completely understand what do do up to the point were we need to apply the 10.6.8 update.


After my iMac (in your case, your MBP) reboots and you swap the retail SL disk out for the machine specific recovery disk it will continue to install the core OS.


When that is done we will want to apply the 10.6.8 update. How is that done exactly. If done via "software update" wouldnt I be applying it to my iMac since that is what is actually running (the mac mini is just a firewire connected HD at this point right?). How do I point the update to install on the the Mac mini HD? Should I download it manually?


Or, when the core OS is done installing do I reboot once again and select the Mac Mini as the boot drive and then do the update (is that possible? Does the Mac mini stay connected as a firewire drive during reboots or do I hold down "T" at each reboot?)


Having never used Target Disk Mode I am unsure what to expect.

Quite simple actually sir.


Once OS X has completed installing (Mini) the 'Welcome to OS X' activity begins. This includes all the fancy welcome screens, etc. It asks you to create an account on the machine, register with Apple, etc. Once this activity is complete the machine immediately loads into OS X. You see the desktop, icons, Finder bar, etc. This is your Mini's hard drive and OS X install. Simply click the Apple in the upper left corner and run Software Update. It'll find OS X, iTunes, various security updates, possibly a Java update, etc.


Once you've downloaded all of the updates it will tell you that you need to restart. Click restart and the machine will install all of the updates and do a reboot. The Host machine will restart and actually continue to boot from the Mini's hard drive automatically. After the reboot shut it down and connect the Mini to an external display and you're all set.

Thanks for all your help John. I havent installed a Mac OS in a while (complete oppsite to my Windows quarterly routine!) but I thought I remember that immediately after the core OS finished installing a reboot occured and THEN you get the welcome video and registration screens etc. I was worried that I wouldnt be able to tell what I was actually booting into, my iMac or the newly installed mini at that point

Bravo, John Fair!! (And mikethebook, you should mark John's "success" post with the "answered" plus give "helpful" to his other posts -- he certainly deserves the points!)


A question... I would new need to transfer a user on to a new mini. Is there a screen that comes up asking for Setup Assistant somewhere along the way? (asking if I want to "Transfer from another mac") What if the Source machine for Setup Assistant was the same iMac running 10.6.8 that I was using to install SL onto the mini?

Hi Cathy,


Thanks for the kudos :)


You can definitely recover from a TM backup or another Mac once OSX is installed. You get the same OS X setup screen as you do with a stereotypical install. So it will ask if you want to transfer files from any one of the three standard locations. The Host machine's hard drive should be available to choose "From Another Mac Computer", however I have not personally confirmed this. It should work in theory though.


Let us know if you get that to work :)

Hi John! I'm glad I found your post. I have a new Quad i7 Mac Mini "Server" and have been struggling with it the past couple days. I don't need the "Server" parts, but rather bought this version for the processors it came with.


Over the past couple days I found that it's not possible to restore to Lion (Desktop); it restores to Lion (Server). And while the Server version is supposed to be identical to Desktop, a call to AppleCare confirmed my troubles - that "Server" _may_ have slight differences here and there that can cause compatibility issues.


I had a heck of a time trying to install CS5, in fact I just couldn't, and hours of Adobe chats and Googling couldn't help me. I even tried to install Lion over TDM to my Mini from the AppStore image, and it wouldn't boot that way either! It seems the Server edition of the mini only like Lion Server...something keeps it from booting from a clean Lion (Desktop) install or just the Installer itself (on a USB drive I image'd).


Anyway, I managed to get Snow Leopard onto the Mini and am typing this now on it...while CS5 installs without a hitch (so far) in the background(!). My process wasn;t quite as smooth as yours seemed to be, however.


I was using a retail 10.6.3 disc and the recovery discs from a mid-2010 MBP (shipped with 10.6.3). I installed from the retail disc onto the Mini in TDM, then it rebooted (I didn't swap in the recovery disc since they were the same vers 00001BFC ion). On reboot, the installer popped up and said "OS X Can't boot from this disc" and the install was screwed at that point. I guess I should have tried putting in the recovery disc nonetheless?


Anyway, I also had the retail disc on a USB drive, booted my MBP from it, then installed onto the Mini in TDM. This time it seemed to work and the MBP rebooted successfully and I went through all the setup screens, etc. I then ran Software Update and got to 10.6.8 and shut down.


On reboot of the mini with fingers crossed, it booted! I was ecstatic. But the first thing I noticed was that my dual display setup wasn't working right: the display hooked up to the Thunderbolt port was not being recognized. I disconnected it and rebooted and all seems OK now. I ran SU again, but it didn't fix my Thunderbolt-attached display, in fact System profiler shows two identical displays attached, but the Thunderbolt one is a different model display.


My current plan is to install the Lion-problematic CS5, then clone it, then try an "upgrade" to Lion (Desktop) and see if I can boot the mini into Lion (Desktop). If it works, and my Thunderbolt display works, etc, I think I can live with Lion (although i understand what you mean about how annoying it is!).


Otherwise if it won't boot, I will try reinstalling SL the correct way and swap in my recovery disc this time (BTW, how do you eject the disc when the selector screen comes up? And once you do the swap, do you then select the recovery disc and it will continue the installation process?), and hopefully that will fix my Thunderbolt display issue and I'll happily live with 10.6.8!


Thanks again for your hard work!

ok so here's where I'm at with this. I've been working on this for hours and hours now!


My Mini was booting into 10.6.8, but Thunderbolt wasn't working for my external display on that port, and I noticed my cursor wasn't swapping properly between the arrow and input point, etc. Sometimes it would just disappear until I clicked enough times and it came back. Something wasn't right for sure.


My next attempt was to then "upgrade" to Lion using TDM and the app-store image. I somehow managed that, but on boot, the Mini didn't boot and gave me the circle-line (block) icon. Cr@p! My next bright idea was to try and install the "Server" package and see if that would be enough to get it to boot.


I managed to find an "evaluation" copy, and installed it successfully. About this Mac then showed "Server". I rebooted the mini on it's own and...dang circle-block again! Ayyeee! This is driving me nuts.


So now I'm trying the original method of using the SL retail disc. It rebooted and I held option at reboot, ejected the SL retail disc, then put in 10.5.7 recovery (because the only mac that I have that isn't running Lion right now is a 2009 MBP that shipped with 10.5.7!). When it rebooted, it tried to do the install all over again!


So I rebooted, put back in my SL 10.6.3 disc and the installer picked up again. It's just about done and will soon be restarting.


Thing is, I don't thnk this is any different than my initial installation off the USB drive, since that used the same image as my retail disc has.


Does the host machine need to have Thunderbolt on it? Or at least MiniDisplay Port to get the right drivers working before I run the software update to get it to 10.6.8?


OK, it's restarting now...brb!

ok that didn't work. Same issue as before with the Thunderbolt connected display not working, incorrect dual disaply detection (says I have two displays connected when only one is connected!), and random cursor swapping issues.


Interestingly, I found a post on ZDNet about how to install SL onto a Mac Mini (Server). He did it without the recovery disc. But the main take away was that he installed SL on one of the dual drives, and left Lion Server on the other:


http://www.zdnet.com/blog/government/how-to-install-snow-leopard-on-a-brand-new- lion-based-mac/10652


I wonder if that is the key I am missing, to get my drivers all activated and still working.


I'm super tired, but I am going to try and partition my boot drive and restore Lion Server to the smaller partition, then try and install SL again onto the other one tomorrow. On my Mini, I'd formatted both drives completely, with no Lion at all left.


Here goes everything!


Also FWIW, I have painfully fund out that the mac Mini "Server" edition will not boot into Lion "Desktop" period, no way no how. It seems to only boot from the offical Lion Server restore or Snow Leopard through this hack! ;-)


Currently restoring LS onto a small-ish partition now, then on to the SL fun again!


Message was edited by: bryanus

From what I've read on other threads here I think you're right in your reasoning that you should try to get SL installed on the 2nd drive and keep Lion Server on the main drive. Seems that the people who have had success did it this way.


If it makes any difference I have a 24" Apple Cinema DIsplay connected to the Thunderbolt port on my Mini. The downside for me is that apparently there's a glitch in the 24" ACD's firmware that prevents the Mini from using it properly (I had this same problem on Lion so I know it's not OS related). The monitor just sits there and flickers wildly 00004000 until eventually the monitor gets tired of it and shuts itself off.


Good luck with the re-installs! Let me know if you have any specific questions (though I can't really test anything on my end since I don't have a Mini Server myself).

You can install Lion from another Machine onto an external USB Drive and boot your Mac Mini Lion Desktop from there. Once successful, you can transfer your partition to your Mini with Carbon Copy Cloner. I used this Method to get Snow Leopard Desktop on a Mini Server 2010, now I am booting an external USB Disk with Lion on it.

Morning all. John, just wondering if you got PLEX installed yet on your Mini? This is the main reason I got the new Mac mini and was hoping to hear some feedback on wether downgrading to SL had any adverse affects?

Hey Hardax,


Yeah I got Plex 9.3.4 installed last night. Plex just released a new version last night (previously it was like 9.2.7?) so I figured it was a good time to get it up and running. I added my Movies & TV Shows folders before heading to bed and left it to scan the Library all night.


I woke up to a quarter inch of water in the basement so I didn't have a chance to check the status this morning, but I figure it's probably finished scanning.


Ok I just VNC'd into it from work and it looks like the scanning is complete. It found 1386 movies (should be ~1450 so I'll have to clean that up) which is about what I'd expect. Unfortunately it's not worth trying to play a movie via VNC so I can't really report on the UI at the moment, but I'll be able to later tonight or tomorrow.

Ack! sorry to hear about the water. That really puts a crimp in your day doesnt it! Trust me, I feel your pain as I have been there. I should be able to downgrade tonight or tomorrow so either you or I will test out Plex compatability first! Will let everyone know how it works and if I find any other glitches.

Woah whata night! ok i'm up now and saw that Lion Server had restored, awaiting my setup. Well, get this, I set it up and decided to try the CS 5.5 installer, and wth, it's installing??!! Ugh.


Unfortnately the partition for LS is like 10GBs, so I think I'll try installing SL again since I can't get enough of these installs, and if my Thunderbolt works I think I'll stick with SL for now. Hopefully as more users get the Mini Server someone will figure out a way to gte Lion (Desktop) onto the Mini Server, or Apple will allow it to be installed onto this specific version of the mini.


I'll report back in a bit...

Bryan -- since you have the server mini it has two drives, right? My 2010 server minis came with SLS on one disk and the other one blank. In order to raid the two, I had to erase the boot disk, raid the two disks together, and then re-install from the grey restore disks. Did the Lion server ship that way, not RAIDed? At any point did you try starting with two unRAIDed disks and restoring lion server on one disk and installing snow leopard not-server on the other?

hi cathy,


the first thing I did when i got this is pull the top (bottom?) drive out and swap in a 256gb ssd. I left the other drive in there. I didn't even boot it. I then did the command-r to restore, which is when I discovered that it only restores the server version. I then began to set up my mini environment the way I like, which is when i ran into issues running the CS5 installer...and this nightmare began. The other 500GB drive was wiped also, and I put my Home folder and other files onto that.


Well, the main thing I was trying to tackle was the CS5 install, and it seems like that worked with a clean restore of Lion Server this time, so at least if this new SL attempt doesn;'t work, i can just clone that partition, reformat, then clone back to the ssd and go back to lion Server and be back up and productive for once again.


I'm running the 10.6.8 updater now and should now soon if my Thunderbolt and cursor issues remain after booting back into the mini...fingers crossed!

ok, bummer. Having LS on the other partition didn't help my Thunnderbolt or cursor issues. Looks like I will just clone the LS partition, then reformat the SSD to make the partition larger, then clone LS back and hopefully I won't hit any more software issues (yeah right!)

ok, i'm up and running now under Lion Server [sigh]. Seems to be the only configuration I can get working with my hardware, and now that CS5 is running and installed, I should be more or less productive again. Thanks for your help guys.

John, first of all — thanks for clearing up my "misinterpretation" (a handy euphemism for "Uh-oh! I got it all wrong!") in my response to an earlier question, here.


Now, about your problems driving the 24" ACD -- dunno if this has relevance: the discovery that the new Air (and some previous MBP's) used a chopped-down "Eagle Ridge" version of the Thunderbolt chip ("Light Ridge") that powers the Thunderbolt connections on iMacs and other desktop machines. I wonder if they used that same simplified half-chip for the Thunderbolt port on the 2011 Mini — I think it's likely, since the Mini is largely derived from laptop equipment and configurations. Now, even if true, that might not play any role in your 24" ACD connection problem; but, then, again, it could be a problem with drivers and expectations that are built into them; so...


Here's one link among many---

http://www.slashgear.com/macbook-air-gets-half-power-thunderbolt-29168292/

Hey Steve! You know I'm happy to help 🙂


According to AppleCare there's a known issue w/ the firmware on the 24" ACD...that's all I know on that front. I have a 2010 MBP w/ Mini Display out that works just fine on both my 24" ACD and 27" ACD (w/o thunderbolt). It would make sense though if what you're suggesting were true and the Mini is running on some kind of neutered version of Thunderbolt. I guess we'll have to wait to see if someone does a true tear down (beyond iFixIt) and analyzes the port. Until then I'll just keep it plugged into my HDTV via HDMI and call it good. 🙂

I would guess that if it's really a driver issue (one where Lion Server has X driver but SL does not) then you'd have to boot into Lion Server to fix the problem. Having the OS present doesn't really help w/ the driver loading unfortunately. :\

John, probably an unfair "personal" question, but...


What do you use your MBP, Mini, etc. and 24" AD for, mostly?


Reason of asking: I notice a "John Fair" out there in the world who does a lot of photography ("...by passion, not by employment...") and thought it might be you. If so, I have some useful high-end info and goodies for you, as part of my payback for your leadership in finding a path to Snow-Leopard salvation for all of us wandering Mini-pilgrims. Regards!

There are no unfair personal questions when your last name is Fair. 😉 It's a double edged sword!


You've most likely found me (a simple google search for John Fair Photography yields me as the #1 result!).


I am actually a software developer by profession and work provides me the MBP for my day-to-day work. When I get home I typically use the MBP to support our systems after-hours and use the 24" ACD to do that (plus some photo editing on the side 😉). The Mini is actually my media machine to watch movies/tv shows/netflix/etc on in my living room. It also streams content to my AppleTV/iPhones/iPads/etc.


I'm all for info and goodies! If you managed to find my personal site then you likely already know my email...it's easily found on my resume (or else if you can figure out my middle initial and add [at] gmail dot com to my full name with initial you've got it as well).

John, many thanks for your pioneering work on this challenge. I have just ordered a new 2011 Mini 2.7GHz, and while I don't fully comprehend the nuances of each step, I plan to attempt your process when it's delivered.


For a host I have access to an iMac Core 2 Duo that came with 10.5.4 but has been upgraded to 10.6.8 via the 10.6.3 retail disk. The latter is stock no. MC573Z/A and I'm not sure if that was a full OS install disk or just an upgrade - the packaging doesn't say. Since I would want to register SL on the Mini under my own name I'm intending to buy another fresh retail copy of 10.6.3. Does it matter that this would be installed via an iMac registered to someone else? Also, the Apple Store is still offering a 10.6.3 DVD for $29, but again they don't state whether it's a full version or upgrade - some vendors specifically say "upgrade". Does it matter?


Your method includes a "recovery disk", and I'm not sure what this is - the iMac came with just 10.5.4 install disks 1 & 2. Can you please explain?


I'm intending to partition the HDD before I attempt this - re-installing Lion on one volume, then installing SL on another. Does this make the most sense?


Your guidance will be most appreciated.

Hi Anglotexian,


A quick google of MC573Z/A looks like it's the 10.6.3 upgrade disk. I personally used the 10.6.0 upgrade, but this would work as well. I don't recall Apple selling a "full retail" Snow Leopard (meaning it didn't require Leopard already being installed), but perhaps someone else can correct me on that. The real point being that I used an "upgrade" disk. The point of calling it "Retail" meant that it is NOT a recovery disk (such as the install disks 1&2 that you mention). Recovery disks are not the same as the "retail" disk MC573Z/A and the like. As long as you have a copy of a SL similar to MC573Z/A you'll be fine.


Also, you might be in for a smoother experience with the Host machine you already have. You shouldn't have to swap out disks mid-way through the SL install. The host iMac you'll be using can successfully boot your SL disk of 10.6.3 without issue. As a result you shouldn't have to do the swap! That's great because it removes a lot of the complexity (and the issue that caused me the most headache) of the fallback. My biggest problem was that all of the Macs I have access to are too new (yeah I know, life is hard right? 😉).


So to sum up: Upgrade disk is fine, and you should not need the install (which are recovery) disks from the iMac for this process. Good luck!

Well John, had the chance to "downgrade tonight. Everything went perfectly! Thank you so much for figuring this out. The steps o page 1 should be everyone's bible when attempting this. Oh and PLEX seems to be working perfectly as well. Thanks again.

Just wanted to join those that are extremely grateful for your help. Needed to downgrade to SL while I wait for a Lion-compatible update for Pro Tools. Posting this from SL running on my new Mini Server!

Any of you guys that got this working (especiallyJordan with the same Mini Server as me), have a dual-monitor setup using one display through the Thunderbolt port?


What versions of the retail discs (and recovery if any) did you use and what host Mac model/year?


Not sure why I couldn't get mine working right with a 2009 MBP host using the 10.6.3 retail disc...


But my main issue was getting Adobe CS5 installed on Lion Server, and with a clean restore of LS I was able to do that...so I'm up and running on Lion Server, but more curious now on why my attempts at SL didn't pan out.

Unfortunately I use a single monitor plugged into the HDMI port, so I can't help you out there. I used a retail 10.6 disc that I picked up yesterday, I assume it's 10.6.0. I ran the initial install on my brother's 2010 MBP, using the retail disc and the 10.6.3 recovery disc that came with the MBP. For practical reasons I then switched to a 2010 iMac (also my brother's) to install the updates to get it to 10.6.8.


Compared to others, my Snow Leopard install hasn't been running that great for me. Under SL, the system seems to be choking on things that it should be more than capable of handling. For example, an HD movie that played flawlessly in Lion stuttered when played in SL, and a Pro Tools session that even my Acer laptop's dual core handled fine almost brought the system to its knees. I guess I'll have to try reinstalling. Anyone have an idea what the problem could be?

John, once again, a million thanks for working this thru!


I will try the downgrade tonight. But before I do, I have 2 questions that have been asked in this thread but not yet answered....


The first one is, does the host machine need to have Thunderbolt on it or at least MiniDisplay Port to get the right drivers working before I run the software update to get it, (the new 2011 mac mini), to 10.6.8?


The reason I ask is because I have an early 2009 iMac I plan to use as the host, but it DOES NOT have Thunderbolt NOR Minidisplay ports. Can I still use this as a host? Does this matter?


The second question is, when u mention that you must use the "store retail version of SL," do you mean specifically the 10.6.0 OR, the 10.6.3, which is what is currently selling in the apple store? Do I have to purchase a new copy of SL or can I just use the gray disc that came with my iMac back in 2009, which only says 10.6 on the front and a mysterious coded number of 2Z691-6539-A?

I have reason to believe this disc could be a 10.6.0 because I ordered the iMac back then just when SL had come out, so in theory it should be the first release of that particular OS. Or am I wrong in assuming that?

If that is the case, can we consider this disc as the "retail disc"?


Thanks a million in advance to your answers! You rock!

Hi iSight Frustrated,


Those questions have both been answered, but perhaps not in a clear way.


When you install from a retail version of OS X onto a target disk (USB,Firewire, etc) OS X installs a full set of drivers because it cannot determine the type of machine being targeted. The upside is that you've got a bunch of drivers for things like Mini Display and Thunderbolt. The down side is that the install itself is much larger (a minimum install of OS X ~3.5-3.75GB, however this install is closer to 7GB). So the answer to your question about using an iMac without MiniDisplay is: Probably. I can't say with 100% certainty because I haven't done it myself, but yes it should work just fine.


When I say "Apple Retail Disc" I mean the disk you had to purchase from Apple, NOT the gray recovery disks you got when you purchased your Mac. They are very different things at their core because your gray recovery disks only contain the drivers for the machine that they target (in your case iMac). Since you're trying to install SL onto a Mac Mini you must use a Retail copy of OS X (it shipped in a white box with a picture of a Snow Leopard on the cover). If you try to use the gray recovery disk it will fail, guaranteed. So to answer the second question: No we cannot consider that disk a "retail disk". That is a recovery disk. If you try restoring w/ that you will be wasting your time. :\ You can pick up a retail disk for ~$29 online still.


Best of luck!

isight -- when we say "retail disk" we mean the one that came in a box and has a picture of a snow leapard printed on it. The "restore disks" are the grey disks that came with a particular machine. For your purposes, the "restore disks" are the grey disks that came with your 2009 iMac.


The grey disks which came with your 2009 iMac certainly don't have thuderbolt drivers, not sure about displayport drivers.


The retail disks, which sometimes are 10.6.0 and other times 10.6.3 do not have thuderbolt drivers, but certainly DO have displayport drivers -- the retail disk contains every driver for every possible piece of hardware that runs that particular operating system.


The thunderbolt drivers are in the 10.6.7 update (or the 10.6.8 combo update.) 10.6.7 was what the first thunderbolt machines were shipped with.


What we do not know is whether those 10.6.7/10.6.8 thunderbolt drivers will drive the thunderbolt on the mac mini, or if they only work on a 2011 thunderbolt iMac. When Apple says that a machine will not work with an operating system lower than waht it shipped with, they mean that they didn't test the new machine with the old OS (old OSs plural) and so who knows what will happen? If those minis had come out before Lion was ready, then the development team would have had to have gotten the thunderbolt drivers to work correctly on them. There may have even had to have been a 10.6.9 to make them work.


What seems most likely is that most/all "old" features of the 2011 mini will work just fine with SL. The things most likely not to work would be the "new" stuff -- in other words, thunderbolt. We already know that it doesn't work for at least one person. But it may only be broken for certain thunderbolt devices, too, and others should work ok.


The painful conclusion is that if you MUST have an i5 or i7 processor and/or thunderbolt, and you MUST be able to run on 10.6, then your only guaranteed hardware choice is a 2011 iMac. For those of us dealing with size/space/heat constraints (i.e. we need to use this back in the server closet!) the iMac form factor is a problem. This exercise is useful, because we are, through experimenting with different hardwars, figuring out just which things will still work right on an i5/i7 mac mini running snow leopard, and which things are broken.

IMHO, Cathy, your posts are exceptionally incisive and inclusive. In other words, goooooood and useful, if sometimes a bit challenging to read. Nice work and thanks for the contributions here and elsewhere.


Since the 2011 Mini uses the full-boogie Light Ridge chipset to handle Thunderbolt, the same as the 2011 iMac, I have high hopes for the drivers in the recovery disks for the 2011 iMac, which I'll be using later today to flip my new Mini to Snow Leopard (and then to 10.6.8 version 1.1, the "fix" version). I'll know in a few hours --


A reminder: when bumping up to 10.6.8, it's important a good idea to use the Combo version of the updater to 10.6.8 v 1.1.

Well Icerabbit, sorry but have to say "you are wrong".


the answer is simple: any existing / older operating system release simply does not have the proper drivers to support the new hardware (motherboard, chipset, cpu, ...) It will panic.


Not true as the MacBookPro 15" early 2011 was delivered with SL 10.6.7 and has all the drivers needed for the Mac Mini Mid2011.


I just got a new Mac Mini A1347 (Mac mini 2.3 GHz / dual-core Intel Core i5 / 2 GB RAM / 500 GB HD / Intel HD Graphics 3000) in my hands.

I tested it with booting from a harddisk of a MBP 15" (early 2011, i7 quad 2.2GHz, Intel HD Graphics 3000, AMD Radeon HD 6750M 1024 MB) which was 10.6.7 and was updated to 10.6.8.

As the graphic drivers match it should work like a charm.

Test has been done using an external harddisk over Firewire 800 and as expected:

It works flawlessly !!!

Now to the hard facts:

Systemversion : Mac OS X 10.6.8 (10K540)

Kernel-version: Darwin 10.8.0

64-bit-Kernel : yes


And if you read on you see even a post that explains how to install from a retail DVD... ;-)

Tried reinstalling this weekend, but still the same result (mouse cursor is screwy, system in general is slow). I thought to do a simple Geekbench comparison between SL and Lion. Here's the summary:


Lion:

Processor integer performance - 7220

Processor floating point performance - 13595

Memory performance - 5070

Memory bandwidth performance - 4410

Overall score - 8740


SL:

Processor integer performance - 2146

Processor floating point performance - 4026

Memory performance - 1823

Memory bandwidth performance - 2021

Overall score - 2726


Obviously, something is very wrong - it's as though my install of SL on the Mini doesn't have access to the system's full resources. It's weird that some are able to successfully install it with no problems, while it doesn't quite work out for others. I wonder if it has something to do with the other Mac that was used to complete the installation? In my case, it was a 2010 27-inch iMac.

I had a bash of installing SL on my Mini Server 2011 last week following the guide on this thread, worked like a charm and runs no problem, but there are definite graphics issues, the mouse would often change from say arrow to finger and not change back, then I tried to watch a 1440p HD video through YouTube as a test and it was a pixelated slideshow mess, through Lion it runs beautifully, and finally as Jordan Darcy mentioned, it doesn't feel as snappy, so I'm back on Lion, and just waiting patiently for any updates.

Agreed, Hardax. It seems like a pattern is showing up: people installing SL on the non-server versions of the 2011 Mini seem to be having (mostly!) good results (and it's possible that the ones with poorer results are having a technical issue related to the disks or machines that they used as intermediate steps to help produce the install). However, it sound like most of the server-version SL installs go well at first, but produce a sluggish machine that isn't using all of its ports or sofware/chip resources, and they get benchmark results that support this.


So, John Fair: have you had a chance to benchmark your Mini with SL installation and compare it to similar machines running Lion (and perhaps also to the latest generation of previous Minis), and if so, what's the result? I hope that we turn up with some good benchmark numbers from properly-installed SL on the non-server models, particularly with owners who opted for the better graphics chip and added more RAM.

Hey Steve,


I don't have a bootable copy of Lion to do any comparisons against unfortunately. My Mini + SL Geekbenched at 1808 w/ 2.5ghz i5 and 4gb of RAM. I thought that was low, which it is, but my 15" MBP with 2.6ghz i7 and 8gb of RAM clocked in around 5400. I don't own a copy of Geekbench though so these are just the 32bit results.


What's weird is that I haven't noticed the sluggishness or beach-ball-of-doom like many others have. I had never used Geekbench before yesterday and honestly rarely put much st 00004000 ock in benchmarking software since there are so many different factors that play into the performance of a machine.


As always w/ OS X (and software in general) YMMV (Your Mileage May Vary)...

Wow John, that Geekbench number seems REALLY low. I dont put a lot of weight behind these kind of benchmarks either but I would assume that the scores should be pretty close to one another assuming similar setups?


According to the Geekbench website, the new i5 mini's should be getting in the 5000-6000 range.


Have you had a chance to play a movie using PLEX yet? I have mine up and running as a sever but havent played any movies on the downgraded machine directly yet. I've only been using it as a file server so far (the whole reason for downgrading - needed Snow Leopards "working" SMB file sharing).


I will try and run a Geekbench tonight to see what number I get.

Uh-oh. I expected John to check in with a cheery "I got a Geekbench of ten thousand, and I'm running two copies of FCP and a movie at the same time I'm running the Geekbench." Oopsies? Lions and Tigers and Snow Leopards, oh my! ;-)


Seriously, as Cathy Fasano said a couple of days ago, ..."We are...experimenting with different hardwares, figuring out just which things will still work right on an i5/i7 mac mini running snow leopard, and which things are broken..." In her post, Cathy hit a typo and said "hardwars," which may actually be closer to the truth for right now. So, we're still in the first few steps, and after we figure out what breaks, we can hack out some workarounds and get this thing humming.


I can't help but wonder if some Apple hardware engineers have been watching this thread, smiling wisely and saying to themselves something like, "They think they've figured this one out already! But, heh, just wait..."


Are we having fun yet?

I just connected to my downgraded SL mini (not sure if VNC affects the outcome?) but I got an aweful Geekbench score of 1754.


Wonder how that translates to real world performance?


I have a friend who just picked up a 2.3 mini this weekend. I will get in touch with him and have him run the same Geebench test under Lion.


Very disapointing. The computer geek in me isnt very confident that I will be able to live with a score like that! May have to go back to Lion and find workarounds for my networking and PLEX issues.

Re If VNC is running, does it affect your Geekbench score:


Yes, anything that ties up some of your Mini's processor(s) time and cycles will affect the Geekbench score. But not nearly enough to explain the difference between 1754 and, say, 5500.


"Hardwars" -- and we are NOT having fun yet.


So, which are the easier discoveries:

1) workarounds for networking and PLEX under Lion, or

2) discovering if Apple intended to hard-code the 2011 Minis to not run Snow Leopard (not likely, or we wouldn't have gotten this far),

3) if that's not the case, figuring out how to transfer / hack / tweak existing drivers for SL so that the Mini can make the most of the i5/i7, Thunderbolt and graphics chips that are waiting to be unleashed. Not easy, but possible.


We need to find some Code Whisperers.

I just hope Apple comes up with a way to easy install Snow Leopard on new mac minis. since upgrading to the new mini with a lion I have only problems and would love to go back to Snow Leopard. it's a shame that Apple ships a unit with so many problems and does not allow to downgrade to Snow Leopard. I just wish I keept my old Mac mini and save me the thousand dollar upgrade for nonworking system.

Well just to add myself to the unhappy list. I also got the server model just to save on power and find a suitable replacement for my 2008 Mac Pro 8 core. I saw that the geekbench scores rated the new i7 mini server just a bit ahead of my power hungry Pro machine so out I went to get it. I absolutely have to have SL as my Epson 1640xl Tabloid scanner and Macromedia Freehand must use Rosetta in order to work. I'm stuck with old technology and getting a new Tabloid scanner would cost me more than a top of the line imac...


I put the Mini under target using my 2011 MBP and installed a retail version SL 10.6.7 (my genuine retail 10.6 had a kernel panic and I found one on the net that worked fine). The issues started when the install migration assistant had problems moving over my data off of my tower machine. It actually crashed my raid partition on my tower. Then I reinstalled and skipped the migration and just started fresh but had what others saw - the quirky cursor. I immediately noticed a painful delay in mouse movements as I upgraded to 10.6.8. The machine is running but it is generally running slow as molasses. I was going to install the 512gb ssd but I don't think it will solve the problem. Sadly I'm about ready to call it quits now and use the 15 day return period to snag me an imac instead. I'm not really looking forward to spending more than twice the money on one. I'd certainly miss the easy internal access for the mini to the super tough SSD install into an imac.

As expected the same configuration running Lion scored almost triple the SL score in Geekbench. I have to assume this will translate to real world speeds. I didn't spend $800 to get a third the speed so back to Lion I go I guess.

Wow, it seems that I've spoilt the fun by running those Geekbench tests. Sorry everyone! It's a shame, because for me the Mini Server has been brilliant running Lion - I just would have liked SL so I can run Pro Tools until Avid updates it for Lion (they're working feverishly on it right now, but no one knows when it'll be released, could be tomorrow or a couple of months).


Ah well.

I just received my new Mini i7 / 2.7GHz / 4GB, partitioned the HDD, and installed 10.6.3 on the second partition per John Fair's method. As John predicted, I did not have to swap disks since the host was an "old" early-2008 iMac. Then upgraded to 10.6.8 and Geekbenched before loading any additional apps. Ran the test three times in each OS and took the averages :


Snow Leopard: 1807

Lion: 6453


While the SL result is disappointing, it's better than Tiger running on the old G5 this Mini is replacing! So I guess it will get me by for a while until I can upgrade my old apps. Speaking of which, I've yet to try running those, but am not experiencing any mouse issues or spinning beach balls while playing with the regular apps. Internet browsing dynamics are similar to what I'm used to with the G5, while the Lion experience is much brisker and seems to reflect the Geekbench results.


I'm still hoping that someone much smarter than I can figure out a patch for whatever is missing here, but will try to embrace Lion for the future. I think that Apple has badly underestimated the need to maintain Rosetta for a while longer, especially in these cramped economic times. They are certainly stretching hard won customer loyalty from the early days (since 1994 in my case).

Hello all and thanks for all your hard work. I am running a mid 2007 mini and my Apple Protection Plan runs out in November. I'm contemplating a new mini, non-server, 2.7MHz i7. If I understand correctly, the reason to run SL on a new mini is becasue SL still has Rosetta, in order to run older PPC software?


(1) How do I go about checking the software I now have to see if any requires Rosetta?


(2) I have the retail 10.6.3 SL disc MC573Z/A and used my existing mini to format an external HD and upgrade it to 10.6.8. However I do no have any iMac or other newer Mac to use for target disc install onto a new mini (other than my old mini). If I understand the messages in this thread this means I cannot do a fresh install of SL in target disc mode to get all the new and latest drivers (such as Thunderbolt or MDP) onto a new mini. Am I correct in this understanding?


Thanks for your help and elucidation.

I have two Minis; one is my media center running 10.6.8. The second is the new Mini 10.7.0 with lion. I plan on partitioning the second one's drive and then using the Time Machine from the first Mini for the second partition, using Target Disk Mode to install. Anyone see any potential problems?

I used the store bought SL on my partitioned drive and it worked. I was able to use the system migration to move my files from the Lion partition over. The only problem is that System Preferences keeps crashing whenever I try to change the desktop picture. I am going to run the benchmark numbers, if I can figure out how.

I had to reinstall Snow Leopard. Using Migration Assistant to downgrade applications from my other partition is a big no-no.


But once I got SL back up and running, I was able to run Benchmarks on the Lion and SL partitions on my Mini i7 / 2.7 GHz / 750 Gb / 8Gb. Here are the results:


Lion: Score 6642


Processor integer performance 4994

Processor floating point performance 9185

Memory performance 5832

Memory bandwidth performance 5137



Snow Leopard: Score 3218


Processor integer performance 2616

Processor floating point performance 4669

Memory performance 2452

Memory bandwidth performance 1780

MathGeekRob, it's interesting that your SL score is almost double that of mine and John Fair's - I wonder if that's due to your having double the RAM? Well, it's a mute point for me now as I have returned my Mini as unusable as a replacement my aging G5. Although the native apps ran tolerably well in SL, some of my old PPC programs such as Adobe GoLive CS were very unstable. Instead, I've just ordered a refurb 13" MBP which still ships with SL. I'll partition and add Lion so that it can serve as my bridge to the future and as a backup to my G5 should it keel over. I'll install a larger & faster HDD and put the original one in an OWC Express enclosure for portable backup. I've never been able to justify a laptop in the past but this solution will give me some all round flexibility. Maybe when third party software catches up with Lion, and the latter gets refined, I'll try the Mini route again!

Add me to the list of "successful" SL installations that are running slow as molasses. Oh, and my second display does nothing while hooked up to the Thunderbolt port...


Geekbench scores:


2011 Mac Mini Server in stock trim:


Geekbench 64 bit = 9509


Same machine after upgrading to 8 gigs of RAM & swapping the boot drive w/ an OWC SSD:


Geekbench 64 bit = 3069


.....weak.....


1/3 the speed & lack of TB port is not worth running SL. I will be reinstalling Lion tonight, I guess... Maybe there will be hope with 10.6.9 00004000 if it comes out? I truly just do not like Lion at all.

So, just to take the other side, here...


Yes, I'm certainly retaining Lion on a partition on my new Mini (i7 dual with 8 GB Ram and the Radeon), and with a few updates I'm sure that I'll gain some satisfaction with improved Lion reliability, etc.


On the other partition, I'm quite content to live with Snow Leopard getting scores similar to what MathGeekRob is getting -- for the things that I need to run under SL. Point being, it's slow as **** compared to the Lion partition, but it's tolerable compared to scores on the last-generation Mini or on many of the older machines from, say, a couple of years ago (excepting a well-fitted-out Mac Pro, obviously!).


On balance, it's what it is: it's a crutch, and crutches are just to get you places that you have to be. I can still use some software I otherwise would have lost the use of, and it runs less well than I would have liked, but it's tolerable (and better than I would have had not many years back!). I can live with that, even if I'm disappointed. Plus, we may be able to find hacks, soon, that will make SL run better.


I'm glad we still have a crutch, and many thanks to John Fair for showing us how to find the crutches and unlimber them. And my thanks to all of you -- to everyone for their contributions that got us here!

I success to install SL on my mid 2011 Mac Mini, duo core i7.

The host Mac is a Early 2011 MBP 13" 2.3G i5 which comes with 10.6.7, I install with a retail vesion of 10.6.3, on reboot - hang - I do not have a "restore disc"; with my MBP, then I insert the "installer disc" and it works well.

Thanks

As people do this install, please report back here as to how things behave, especially after a few weeks go by. And ESPECIALLY if you find a fix/hack/workaround to something that was broken or functioning badly.

Like several of you have reported I too have problem with low performance on the MM Server i7 with 10.6.8 installed.


Everything works, but it seems like I just get a quarter of the CPU performance when I run Xbench. The same for PHP apps being executed. Could it be that only one core is being used?


There seems not to be a simple solution, but one of my thoughts about this is to use some of the techniques that are being used by the osx86 community. There seems to circulate modyfied kernel extensions that adds support for sandy bridge equipped systems. More at tonymacx86. I haven't tried any of these yet, but I plan to if not someone else does it before me.


The disturbing thing is that I get full speed when I run the same OS on my MBP i7, but not on the mini. So there must be som small difference between the two processors that the OS does not handle.


Any suggestions for a solution is greatly appreciated.

Great posting, Karl!


What you've summarized is exactly what many of us are exploring:

we know that the system should work under Snow Leopard, and in fact it does, but at a fractional speed;

the speed is fast enough to allow some useful work to be done in SL, but it certainly could be much better;

it seems clear that Apple has not implanted a "poison pill" totally killing off Snow -- I accidentally typed "Slow" ;-) -- Leopard in the 2011 Mini;

and so, it's likely that there are some kernel patches or other "fixes" that will dramatically speed up SL on the 2011 Mini(s) and allow us to run SL-dependent software, including Rosetta.


Many of us are in "dual boot" situation, now -- SL on one partition, Lion on another.


This is now in the court for coders who are a lot better at parsing instructions than I am. If we can get this in front of some really insightful people, my best guess is that we're only days away from a solution that would please a lot of users and add big pile of new 2011 Mini buyers to Apple's lists. I've helped solve a similar problem, previously, but I don't know the instructions that call i5/i7 cores into use and drive effective multithreading, or how to add them into SL, so I'm in over my head and treading water. And, optimistic!


How to get an answer? -- well, the hero will be whoever posts some pointers to this problem in enough places that it finally gets someone's attention -- someone who can and will parse the OS code and find a way forward. They're working on it in other forums -- such as MacRumors.com, 123MacMini.com, and elsewhere.

I'm a little confused. The RETAIL disc I have for Snow Leopard is 10.6.3. Would I still have to go about the same process through TDM with a hsot computer? Or Would I skip switching out the disks?


I have attempted to boot from the disc and the mini install just hangs at the Apple splash screen. Nothing spinning whatsoever.

Steve Jolly wrote: Quite a few of us need some of the capabilities of Snow Leopard that are (for right now, anyway) lost in Lion.

Which capabilities are missing for you?


What other capabilities are missing for others?

To follow up on my previous postings: I returned my Mini as unusable running SL and ordered a refurbished early-2011 13" MBP / 2.7GHz / i7 / 4GB instead. Although advertised as loaded with SL it actually came with Lion. Went ahead and partitioned the HDD, successfully installed SL. GeekBench scores (32-bit): SL=6912, Lion=6886. My old PPC and Universal apps run perfectly. FWIW this seems to confirm that the new Mini definitely has some unique architecture which hobbles SL and which was not present in the early-2011 MBP - the latter designed to run SL but upgradable to Lion.

William Donelson wrote:

Which capabilities are missing for you? What other capabilities are missing for others?


William, I won't go into great detail on this reply, since it's detailed at various points in the hundred or so previous posts from other users, but --

My personal "wish list" for things that could someday run better in Lion (but for now, for me, need Snow Leopard) begins with my "used daily" software such as Final Cut Studio 3 and continues all the way back to having Rosetta available for the very few legacy apps that we neanderthals have some money (and working files) invested in. I appreciate Lion and am using it daily on two of my machines, but I use my Mini for serious work in a highly-mobile situation (otherwise I'd tote my big i7 Pro along) where a MBP won't help me; I've installed two big fast drives in my i7 Mini and taken it up to 8 GB (and soon to 16 GB) of RAM plus some other upgrades, and Snow Leopard as an option would be very handy in some frequently-encountered circumstances.


Also, as outlined in the last few postings directly above, there are still come common stability and interface issues that need, for now, to be sorted out in Lion. I'm not rejecting Lion, certainly -- just needing some of the capabilities of Snow Leopard and trying to get SL to function, for now, on the Mini at an acceptable speed. We "AngloTexians" are apparently all a backward people who can't deal well with the future... ;-)


SJ / Houston / Atlanta / Boston

Add me to the "success" list thanks to John Fair's original instructions and lots of excellent reading in this thread. My Mini arrived two weeks ago. It is an i7 with 8 Gigs of RAM. Thanks to this forum I made a Super Duper copy of the Mini as it was out of the box after user configuration as a backup just in case. I used an early 2011 MBP as my base machine. I had already upgraded it to Lion from the App Store so I had to wipe and retreat to SL 10.6.8 in order use this workaround for bringing the new Mini back to SL. My SL base disk was ordered as a SL "Family Pack" as soon as SL was released, so it holds SL 10.6.0. My MBP's "Recovery Disk" is 10.6.4 because it is fairly new.


On my first try I got lazy in the final stages of configuring the re-provisioned Mini and used a Time Machine backup to import "settings" from an older (circa mid-2010) Mini that I was replacing with the new factory Lionized Mini. After the Time Machine settings restore the new Mini (trying to now run SL) just hung when booting. So I wiped the drive and started over. The second time I typed in all the new config info and so far all seems to be going well with the new Mini now happily running SL 10.6.8. I haven't had time to use it enough to encounter any problems such as some discussed here or notice a dramatic decrease in response time. I'll post again after some use and experience.


One question though...I also bought a new i7 MacBook Air about a month ago and would love to get it back to SL, but with no ability to use FW and Target Disc Mode, I guess I'm stuck unless I can manage a similar downgrading process using Super Duper. I also captured it's drive in its brand new System 7 state that I can boot from., so at worst I can create an SL bootable partition on an external drive and just boot the Air to it if I want to run it on SL. But it would be nice to have SL on its Flash Drive native. Any insight would be appreciated.

Things seem to be running OK. The only problem I have encountered so far is that the external USB DVD Superdrive purchased from Apple along with the MacBook Air which had worked in the new Mini running Lion before rebuilding with SL now does not work. It seems to get power and try to read the DVD as I can hear it navigating the disc but it does not "mount" and show on the desktop and hence I have lost acess to easy install of DVD-based siftware. I can, however, still boot the Mini from the MBP in TDM and copy over the install disc image to install, so not an insurmountable problem. I tried looking at the SL System Preferences on the Mini for CD's and DVD's and it does not show a config choice for "open with Finder"...only "Ignore" or specific apps or scripts. But on the MBP running the same 10.6.8, this option for "open with Finder" is still available in the preferences pane for CD's and DVD's


It's funny, the downgraded new Mini does have no problem powering up and mounting (via USB or FW) external mini-drives, it just won't mount the Apple USB superdrive. I have an older USB/FW Pioneer external drive in a box somewhere that I used to use on an older Mini that had a Matshita internal drive which sucked. I'll dig it out and give it a try and report back. In the meantime, maybe some expert here will point me to a solution. Thanks!


BTW, it is great to have Front Row back as I used my older Mini as a media center for iTunes and EyeTV program playback and now the new Mini running SL can do the same...even better, in fact as it has an HDMI out port for the Sony HD TV and the older Mini needed a Mini Display Port to HDMI adapter.

Can you please run a Geekbench score and compare to what it was/is in Lion ? You can find results of your Mini on the Geekbench website.

I still hope that there is some software/hardware combo which works without the 60% performance penalty.

Most likely discs from a Snow Leopard MBP that has the same cpu and the same graphics as the Mini ?

@Pisalek...O.K. I will download Geekbench and run it and post results as you requested. The results will be for the now downgraded new Mini running SL. I am confused though about the comparison you would like? Get the already known Geekbench results for a MBP which has the same hardware and graphics profile as the new Mini? I'm not sure that will end up being an apples to apples comparison since the new Mini is an i7 Core Duo with 8 MB of RAM and I don't think there is a MBP with that profile unless there was a new MBP introduced along with the new Air's and Mini's.

Karl, the miracles are mostly hidden in the leeetle magic Apple chips and code that tell your Mini how to use your i7. The problem is the missing code in Snow Leopard that your Mini needs to access all of the chips and peripherals and software that you want to use. The magic isn't in the obvious specs about RAM and CPU, it is (was!) in the little phrases that are missing from the new OS and from those other "enabler" chips that direct commands to the right places -- places that Apple doesn't think that we need to go, anymore, for our own future good and for the future improvement of the Universe.


In this case, maybe it's more like an old bridge along a comfortable road that we're used to driving with our Macs; we need to get to the old places, while Apple wants us to use the new "improved" bridge and the new wider roads -- all of which are potentially faster, go to cool new places, and are there for a purpose, to allow our "improved" Macs to do new things with crisper, faster code and with somewhat altered hardware, without needing to accommodate old code and "old actions" and the old turns in the road that Snow Leopard enabled. We'll probably see the point and learn to like the new scenery, eventually. Right now, some of us still have to get to the old places (I want 00004000 FCP Studio 3 to run smoothly on my Mini!) even if the old road and bridge been partly disassembled.


So much for stretched metaphors, but there's some truth in it. The new road from Apple ain't fully paved yet. A few code patches, well-written, will get us over the gaps in the old road and bridge, then we get to choose, and even take BOTH paths. For a while.


We get to do that -- if we can find the way. No trolls, just old roads that aren't on the new maps anymore. Ah, progress...!

If you look at my previous posting you can see that I understand fully what is happening with the hardware.


But my respons was to khorning about his doubts of there being any MBP with similar specs to the new mini.


We are still searching for a solution to get the mini i7 att 100% speed. As I've mentioned before, the hackintosh community might have something we can use.

We all know what this is about.


It's about converting iPad and iPhone users into Mac buyers. And doing that in cheaper systems (to build) with higher profit margins, too.


Unfortunately, Apple is alienating its existing base of customers in doing so. This is a common corporate mistake, chasing a new market at the expense of an existing market of loyal repeat-buyers. This rarely produces a better bottom line.


This also creates a significant new burden for 3rd party developers and suppliers, which can generate extra revenues, but at a cost. Perhaps they will just wait to see if Apple caves in and restores the functionality we all want and expect. If so, everyone loses.

Here are the post new Mini OS step-back Geekbench results as promised...not sure about how it compares to others. Sorry about the edits and formatting...I tried to enter an "image" of the Geekbench results, but I have no place or way to upload it to the web for a link reference, so this is edited plain text.


Most of this stuff is waaayyyy over my head but I am learning a lot! 😁



Summary:


Geekbench 2.1.13 for Mac OS X x86 (32-bit)


Geekbench Overall Score = 1875


Integer Processor integer performance score 1291

Floating Point Processor floating point performance score 2397

Memory Memory performance score 1897

Stream Memory bandwidth performance score 2053


System Information:


Operating System: Mac OS X 10.6.8 (Build 10K549)

Model: Macmini5,2

Motherboard: Apple Inc. Mac-4BC72D62AD45599E Macmini5,2

Processor: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz

Processor ID: GenuineIntel Family 6 Model 42 Stepping 7

Processors: 1 Threads: 4 Cores: 2

Memory: 8.00 GB 1333 MHz DDR3

Processor Frequency:2.70 GHz

Bus Frequency: 100.0 MHz

L1 Instruction Cache: 32.0 KB

L1 Data Cache: 32.0 KB

L2 Cache: 256 KB

L3 Cache: 4.00 MB

BIOS: Apple Inc. MM51.88Z.0075.B00.1106271442







User uploaded file


Message was edited by: khorning


Message was edited by: khorning

khorning wrote:


Here are the post new Mini OS step-back Geekbench results as promised...not sure about how it compares to others. Most of this stuff is waaayyyy over my head but I am learning a lot! 😁

User uploaded file

Sorry, but graphic is not loading. Please check.


Thanks for fixing it!

GULP...if I read the summaries on the Geekbench website correctly, my new Mini out of the box (if I had tested it) would have scored in this ballpark...quite a loss so I do hope ultimately there is a way to gain some of the hardware's potential back in Snow Leopard.


Mac mini (Mid 2011)

Intel Core i7-2620M 2.7 GHz (2 cores) = 6980

Actually, great work on that posting! That's what we needed to see.


And, unfortunately, as expected -- there's a big performance hit from the drop-back to Snow Leopard.



It looks to me -- at first glance -- like your Geekbench scores are, in general, 40% or less of the speeds you'd expect to get if you were running your i7 Mini under OS 10.7 Lion -- and presumably just about that far below the scores you'd expect if it were possible to do run your i7 Mini under a fully-activated, full-speed Snow Leopard setup.


Not yet... not yet... but coming soon ...on this Channel (we hope!) 🙂

Karl, I did realize that you fully understand the situation. And, if you're looking from time to time at the "viewers" numbers for this thread, you already realize that there are many hundreds or thousands of other folks looking in on this conversation to find out if it's possible to get SL up and running on their 2011 Minis.


We have had 8,193 views, so far, as of right now... (just checked).


From time to time, a little summary of "what's up and where it might be headed" on this thread is a good idea, to keep them from giving up and going away. There will be a solution, and it will come from someone who views this thread, or someone who's on another forum in another venue or is in the Hackintosh community and just gets interested. We need to know about that solution and help promulgate it when it's worked out.


I have NO doubt whatsoever that it's possible to run SL at high speed on a 2011 Mini, It's just a question of knowledge, input and some effort from some folks who understand the challenges and who know the "back roads" to the OS. My detour into metaphor wasn't aimed at you. Thanks for your patience.


Yes we can can! 😁 FREE THE SNOW LEOPARD 10,000 ! etc etc etc.

Thanks, Steve....


I have now noticed a couple of anomalies. My Apple wired mouse (one generation earlier than the newer Apple Might Mouse) behaves oddly. Clicking an icon on the desktop, say a disc image file, exhibits an erratic "blinking" of both the cursor and the icon for the image and clicking on the image sometimes does not open the file...it takes a Control "O" on the wired keyboard to open it.


I'm still working with the Mini on the dining room table until I finish cloning it in SL state to an external drive with some Utilities (DiscWarior and Onyx) so I haven't put it back in place in its media center home across the living room under the Sony. I'm hoping a wireless Mighty Mouse and keyboard will not behave in a similar manner.


And in the DUH department, I just figured out what that whole Mac configuration is for "Sharing CD's and DVD's" so I can load disc-based software to the Mini or Air over the network from the MBP rather than the Firewired TDM that I though I was stuck with when the Air's USB Superdrive quit workng on the downgraded Mini...guess I didn't even need to buy it....live and learn!

For those of you who are reverting to Lion to save yourself and your Rosetta (PPC) apps here's something I just read over on Reddit:


"Grab a Snow Leopard install DVD by whatever means you should choose (no one is judging you.) Then go into optional installs, and choose optional installs.mpkg. From that installer package select Rosetta, and you'll be able to play Age of Empires II like me in no time!

P.S. I'm sure a lot of you knew this already, but for those who didn't like me, I thought it might be helpful!"

@Pisalek =...I forgot to mention my Mini has an internal 500GB hard drive and not Flash. I am tempetd to take it back to factory Lion and test it as I'm getting hooked on this techy stuff. 😁 I do have the Mini back in its place in the media cabinet now and with wireless mouse and keyboard my erratic peripheral symptoms have disappeared. I also re-built the directory and repaired disc permissions before that and retested with Geekbench. I thought the "housekeeping" might help, but this time Geekbench said overall score was 1809 instead of the earlier result of 1875. The only thing I did between the two was add the Utilities before cloning and re-testing.

I haven't tested it personally, but that's the look of it. I have no use for Rosetta personally so I'm not going to install it. Sorry...but it's not worth the hassle for me. I think Steve had been looking at SL as a Rosetta replacement. Perhaps he'll read this and try it out.

http://en.wikipedia.org/wiki/Rosetta_(software)


It's not clear to me which of my dual G5 PowerPC apps will run under Rosetta at all...


A selection:

$199 Photoshop CS3

$ ? Filemaker Pro 10

$ 79 iWork 08

$299 MM Director 2004

$ ? MS Office 2004 (Word, Excel)

NoPod

Sorry, that was a response to iXod. I was in the wrong posting when I hit "Reply."


😁 We ARE having fun, now...

and our Macs will be joining us, shortly.

Just curious: do you know the rationale behind Apple's decision to allow Lion to be used in virtualization, when previously they only allowed the Server versions to do such?

Congradulations John on your persistence. Which mid-2011 Mini were you able to install SL? i7 Server? 2.3 i5? 2.5 i5?

This is AWESOME!!!

Parallels hasn't been updated yet, won't let me install Snow Leopard. Bummer I picked the wrong one should have gone VMware.

Oh, oh...

it seems that VMWare made a mistake,

keep your downloaded Version of 4.1 and don´t update!


http://www.tuaw.com/2011/11/21/fusion-4-1-support-for-pre-lion-non-server-os-x-i s-a-mistake-s/

After some month experience with Lion, it's the first System which I don't want to use!


Our office went back to 10.6, we love our Mac's .... again!

Bravo!!!!


(Is there some vote we could take and award newfoundglory a couple of thousand points to recognize his guru status? 😎)

Now THAT'S what I'm talkin' about! YEAH!


Easy-peasy. My 2.7 GHz i7 mini under SL actually runs faster than under Lion.


Good-bye Lion.


iX


Ditto upgrading NFG to God status!

Try screenresolution.

I'm going to try this now. I have a core i7 MacBook from early 2011 and my minis are i5s. ?It's totally worth a shot. Thanks!

Yeah, I probably should have put the chmod in there as well. Oh well, if you get errors follow the above!

5170 to 6588 doesnt sound like a massive increase? my quad-core went from about 3200 to 8700!!!

True - but it's in the range for what's listed on Geekbench. Maybe the kexts make a lot more difference on the core i7.


Thanks for the tip on this, BTW. 🙂

@dimoe - your scores are looking pretty strong - did you make some other changes to your system?

I think I might have discovered a small problem with this...

Do you notice any difference between the bluetooth range in Lion, compared to Snow Leopard?

According to Tech Support at Mark/Space makers of The Missing Sync: Lion has all sorts of bluetooth issues.

er... make that 1920x1080 in every instance in the previous post.


Just a typo. There is no 1900 resolution...


Symptoms remain unchanged.


iX

Somehow this got posted to the wrong issue. Sorry

Do you get any errors or warnings when updating the prelinked kernel?

(run kextcache -system-prelinked-kernel as root)

Found the drivers here: http://www.osx86.net/view/1537-drivers_for_intel_hd3000.html


But as I replied to Newfoundglory, they solve one problem but creates an even bigger one 😟


/Kasper

since your first advice a month ago everything works fine mith my i7 Mini and SnowLeopard,

Thanks for your continious work!


Why is your Level still 1 (0 points)? It should grow!

I wonder whether it would not be easier to clone a SL 10.6.8 partition unto a partition in a new generation mini. I have just purchased a i5 one.

Give it a shot and report back.😉

I will, not today but for sure these days. An i5 cannot be so new, must essentially be the 2011 generation even if with Lion preinstalled.

I guess you didn't read the whioe topic... ;-) Cloning a already updated partition was the first thing we tried...

I know it's a little late in the conversation, but is the Snow Leopard that is desired for installation on the i7 quad mini-server the Client or Server version?


Sorry for the obtuse question.


Thanks.

The normal ( client ) version works fine on the mine server.

Brilliant tip! Working perfectly for me now. Thanks ashtangiman for seeking out the solution (and to the original users for figuring it out.)

ZX I tried, no chance. Still "Quartz Extreme needed"... :-(

Just notet the same thing (500 mA USB issue) after your post, ZX48, guess we need to start looking for kexts again 😐

Just an idea - Looking at the system information (Lion, MBP 2009) we are looking for a driver named AppleUSBEHCI or something that controls it.

By the way I will do the Geekbench test in Lion and SL to see the difference.
Thanks for your suggestion!

I scored 6082 in Geekbench. i5-2.3, 8Gb, shipped slow hdd (not for so long...)

If you only use one display, it's normal.


I have two displays connected to my Mini and the Dell and the Samsung are listed (two at the bottom are not connected)

A MacPro can connect 3 displays...

The system report on mine shows only the connected display (via HDMI port). Do you have a display adapter or thunderbolt device connected?

Im using the external trackpad without problems. Are you on wired or wireless network? I have had some bluetooth issues when using wireless network and only use wired now.

@newfoundglory: yesss pretty please...

I would love to be able to run a .pkg to sort this out in one go.

Instructions would be nice also...

Tnx 4 da work so far

@nfg


YES off course!

some weeks ago i've asked if some can upload an image, but as normal, no reaction :-(

at the moment, I only turn off the Mini or turn off the display


but sometimes it's smart to save open windows/programms and work on later

Any chance you are sharing internet? That stops sleep, dead in it's tracks. Found that out the hard way.


Just something to look for.

I don't understand too much of it,

but with "merging" the newest extensions, the mini is fast again with geekbench and the disk speed is faster than before

Is there a way to install the Thunderbolt 1.1 Software Update on a 10.6.8 modified mini? I am getting the "This software is not supported on your system" error.


Thanks for all the help by the way.

I am just a user and will not get into programming


Whatever happened with newer or older kexts,

I tried deep hibernation and it worked today!

Geekbench is still fast


Thanks newfoundglory!

this looks fine

enjoy it!

Works for me too.

All working and better Benmarch in 32 bit mode. I will try 64 bits soon.

Is DVD player app working for you guys ?

If you want to play a DVD from an external drive, try VLC Player. That should recognize the external disc and play it.


iX

Thanks, good post, thanks! 🙂

I made the edit's on framworks no go for me anyone have any luck ?

Works fine for me. Im using the usb superdrive.

How many edit's did you make on the framworks ?

Hello


Can any of you with Mac mini EFI Firmware 1.6 (latest update) installed confirm whether Snow Leopard will still work on Mac mini 2011 models?

@ iXOD I assume you've repaired Permissions and checked the import settings

in iTunes for compatibility w mp4 (video). You might also try to locate them through

QuickTime.


Good luck, Tom

Hi tjk,

Thats exactly what i was planning to do , first clone stock lion system to another external drive , just in case.

Thanks for your sugestion.

Steve: Thank you for your kind words!

Ok I got it. I did notice some users getting errors. If I get popups with these kexts, I will remove them.


Thanks for all your help.


mesa3077boogie

Thanks for your effort newfoundglory! Are the new display drivers included in the package you created? The mediafire download link doesn't work anymore. Is there any other place I can download them?

Thank you javi_! I will try them out!

The NFG package is by far the easiest way to install the drivers/kexts, etc. I can upload the NFG package installer later tonight if you want/need me to. Just let me know.

Hi mesa3077boogie,


If it is different than the one on page 30, please do so.


Thank you, I appreciate it!

Its the same package, I though you said that the original mediafire link was dead thats why I offered to re upload it. So nevermind I guess..

Did anyone encounter problems with the latest september 2012 security update like I did? It bricked my Mini, and luckily, I was able to restore it with a time-machine backup from my 2009 mini.

No sir just the usual mouse losing connection issues..

I can't believe this thread is still going?


What are we going to do when the rumoured late-2012 Mac mini arrives?


Its not going to run Snow Leopard, you know 🙂

And how do we know this?

Apple > About This Mac > More Info > System Report


What is the 'model identifier' for the system you are trying to install SL on?

By the way, my cursor doesn't work well with a magic trackpad. Is there any solution? I am waiting for it!

email sent.

Roy

I have successfully installed SL. But I need the NFG installer.

anybody have a link for mit?


<Email Edited by Host>

Strange, for me it works perfectly after the "not able to scan for virus" message.

Link works fine for me still. Just checked it.

But Im uploading it to my own ftp as well. should be there in a few minutes:


http://www.markhensley.tv/macmini/

It works for me.

sorry, for some reason I am unable to upload to my ftp at Godaddy. It wont accept the upload

It worked this time.


Thank you!

I need to do a similar install. Is the NewFoundGlory package still available, and could you please provide a link if so.


Thx

Just purchased new Mac Mini late 2012. Has anyone been successful putting snow leopard on the brand new minis?

I have not seen any reports of success with booting from Snow Leopard on the 2012 Mac Mini.

Fine!

I would buy it too,

but I can't find it in the AppleStore (Germany, Italy, USA, Canada)

Call: 1.800.MYAPPLE (1.800.692.7753)


and ask for Snow Leopard Server

It's unfortunantly only available in the US Apple store, i just checked today. In my own country it's not available.(Netherlands)

Maybe I can order it from here and have it sent to you?

Maybe I can order it from here and have it sent to you?

This would be fine

Here is an email-adress to download for two days to get in contact


http://tinyurl.com/ak7vujz

got it & it arrived:


Part Number: MC588Z/A


See if you can find that online store...

i resend my email message again...

Hello John -- I really wish to consult with you on trying install SL on my Mac mini. Is there another method by which we can talk over the phone?

I got my version from MichaelLax, but for those who want to buy MacOSXServer 10.6 in Germany:


Mac OS X Snow Leopard Server für 23,95€, wenn man über die Hotline 0800/2000136 bestellt

reneg32: I would be happy to help you out if there's a way I can contact you through IM, like Skype for example.

See newfoundglory’s instructions on locating the correct Macmini5_*.plist file - which does the trick and Cathy Fasano’s Terminal script to copy it into place with the correct permissions.

I have a modified disk for the 2011 Mac mini server.

What does you're disk contain? I'm assuming your reply is to jesionblue?

Modified Kexts as explained before by another user.

and I run os x 10.8.4 at the moment if that makes any difference

I got your reply I'm at work now so give me a while and I'll get back with you later.

If the 10.7 does fork for you, let me know. And can upload a DMG for you.

10.7 should work for me;) what's the way to upload it or download from my end?

get back to me please and thanks a lot for your help

Hey no problem at all man I will get back with you later by email.


And to the others following this thread, sorry to vwere so far off the original topic.

So, Tim, you do not use TM at all? Do you use any kind of hourly backup? Or just clones (daily?)?


Someone before me must have run into this conundrum...


iX

Please detail I am interested also. Since the MacMini is still Ivy Bridge (AFAIK?) it seems logical that kexts haven't changed much. Wouldn't this also apply to 2013 Mini?

NO..


Mac Mini late 2012 will not even install Lion.

(except as a Virtual guest OS on certain VM Hosts).


Mountain Lion or better only.. (for late 2012 at least).

I know. that's why I wrote 5,2 = Mini 2011 2.3

When installing the software for the scanner, I get

LeafFwXDriverMatcher.kext was installed improperly and cannot be used.


Any way to troubleshoot that?

So, if any one can help me identify the problem, edit the kext/firewire kext to make the scanner (it is already identified), reward will be given. contact me at yadaaa [et] gmail [dot] com

Is there any reason why this procdure should make the mini run hot?


it seems to run at least 20 degrees cooler when i run 10.7.5. mostly at idle. anyone else ever have this?

Mike the reason for this is OS X 10.6.x is not designed for the hardware the newer computers have.

Not something I'll be trying unless I know beforehand that it can be done. Otherwise will just limit my searches to 2010 and 2009 Minis.

OK! Any port in a Rosetta-less storm!